Crimestopper Security Products CS-2900DP-FM manual White +12V Brake Reset, WIRING 5-PINConnector

WIRING: 5-PIN Connector

OPTIONAL CAR JACK WIRING:

HIDDEN BUTTON or

TOGGLE SWITCH (Not Included)

12 V

PINK +

CONTROLLED W/SWITCH

IGN SW

+ IGN

PINK

FULL-TIME CARJACK

White: (+12V) Brake Reset

Connect the White wire to the side of brake pedal switch that shows +12 volts ONLY when pedal is depressed. This will turn off the remote start if someone attempts to drive the car without the keys or if the Ignition key is not turned on all the way.

WIRING: 2-PIN LED / 2-PIN Program-Valet Button (22 gauge wires)

Mount LED in a visible location on the Dash or Console. Connect the small 2-pin plug from the LED to the control module. Note: Connectors are designed so that they will only plug into their appropriate slots.

Mount the Valet/Program/Override button in a suitable location. Connect the 2-pin plug from the Switch to the control module. Note: Connectors are designed so that they will only plug into their appropriate slots.

10