WIRING: 9-PIN Connector Cont.

Green/Red: (-) 500mA Remote Aux. Output 1 (Optional, requires relay)

This is a programmable output that can operate two different ways: 1. (DEFAULT) A Remote Auxiliary Output that provides a ½ second (-) Negative pulse when Button #3 is pressed to open a Factory power trunk or hatch release.

NEGATIVE AUXILARY OUTPUT

 

 

+12V CONSTANT

GREEN/RED

85

86

OR

 

 

(-) AUX OUTPUT

30

87

 

 

 

+12V CONSTANT

Trunk Soleniod

 

OR *

 

 

-OR-

 

 

Dome Light

 

 

-OR-

 

* Test activation circuit in vehicle.

Aux Function

 

 

 

 

 

Connect to+12V for Positive circuits

 

 

or Ground for Negative circuits. Relay

 

 

not included.

Blue/Black: (-) 500mA IGNITION OUT or REMOTE AUX. Output #2 (Programmable Option #17)

This wire functions as a Negative IGNITION OUTPUT (Ground while Remote Starting) for use when connecting factory Security Bypass modules or when an additional external Ignition Relay is required for your installation. This wire can be programmed to function as an AUXILIARY OUTPUT #2 providing a momentary (-) Negative output when Button #5 then #1 is pressed and held for more than 2 seconds. The Aux Channel #2 output stays on as long a the button is held down. Connect to the Negative activation circuit of an auxiliary module or device.

5

Page 5
Image 5
Crimestopper Security Products CS-2900DP-FM, CS-2012DP-TW1, CS-2014DP-TW2-FM manual Negative Auxilary Output +12V Constant