Remote Controller Key Function

Power Port Description

Power Connect	Description

	1. YELLOW ---------------	TO BATTERY IN.
	2. RED ---------------------	TO ACC IN.
	3. BROWN ----------------	TO DOOR TRIGGER (–).
	4. BROWN/WHITE------	TO DOOR TRIGGER (+).
	5. GREEN -----------------	TO HANDBRAKE.
	6. BLUE --------------------	DC 12V OUT (200mA).(Connect indoor camera power)
	7. WHITE ------------------	TO PARKING LIGHT.
	8. WHITE / RED----------	TO REVERSE.
	9. PINK/WHITE-----------	NC.
	10. PINK ---------------------	NC.
	11. BLACK ------------------	TO GND.
	12. BLACK ------------------	TO GND.

Item	Function	Description
-1-	POWER	Toggle key to switch power ON/OFF。

-2-	MENU	Press to enter system setup。

-3-	EXIT	Press to exit Menu。

-4-	OK	During Menu Mode， press to confirm selection and enter sub-selection。

-5-	RESET	Toggle key to force switch to record V3 (indoor camera) and back to original
		camera record. With ignition ON, press reset button to switch V1 to V3.

-6-	pq	During Menu Mode，selection up/down operation。
		During Normal Mode，Press p (2x) to Zoom in。Press q (2x) to Zoom out。

-7-	tu	During Menu Mode，selection left/right operation。