Crimestopper Security Products RS900ER Valet Mode/ Starter Kill Override, Hood Open Safety Switch

1) To operate, press (#3) trunk release button for at least one second to remotely open trunk.

CONVENIENCE AND SAFETY FEATURES

VALET MODE/ STARTER KILL OVERRIDE

The keyless entry will still function normally while in valet mode. In the event of a lost or broken transmitter, the Starter Disable/Anti-grind must be overridden in order to start the vehicle with the key.

VALET MODE:

1)While engine is running with key, press and hold Program/Valet switch for 4 seconds. Lights will flash once for Valet ON and twice for Valet OFF. Door locks will also cycle once. Do Not press brake pedal while pressing Program / Valet switch.

STARTER KILL OVERRIDE:

1) Press and hold BOTH the brake pedal and the Program/Override switch for 4 full seconds.

HOOD OPEN SAFETY SWITCH

Prevents the engine being Remote Started when hood is open. Eliminates risk of injury to someone working under the hood of the vehicle. When Remote Start is activated, system will turn on ignition for 4 seconds, but will then shut down before engaging starter.

NOTE: If engine has already been started with the hood closed, opening hood will not turn off engine.

DELAYED REMOTE CONTROL OPERATION

This feature was designed to help avoid accidental remote starts. The remote start button must be pushed for a full second to activate a remote engine start. This will help in case the remote buttons are pushed inadvertently while in your pocket or purse.

BRAKE PEDAL RESET CIRCUITRY

Prevents starting or shuts off a remote started vehicle when this circuit is active or activated. Prevents unauthorized tampering. This circuit shuts the system down immediately when brake pedal is pressed if key is not in ignition and turned to the run position.

OEM ALARM INTERFACE

This programmable feature is designed to Arm or Re-arm factory equipped security systems in conjunction with remote start and keyless entry (if needed). This feature will maintain the original integrity and security of your vehicle’s factory equipped systems before, during, or after an aborted remote start.

ANTI-GRIND / STARTER DISABLE

Prevents User from accidentally grinding the starter if the Ignition key is turned too far to the start position while engine is already running from the remote starter. Starter circuit is automatically disabled when doors are locked using remote as an added security feature.

AUTOMATIC THROTTLE PUMPING

This programmable feature is for Remote Starting a carbureted vehicle. An optional solenoid can be installed to pump the throttle before the starter engages.

SERVICING / JUMP STARTING

Be sure to put your CoolStart™ in Valet mode before having your vehicle serviced. If you have an alarm system to control your CoolStart™ (RS901), be sure to have it in valet as well or make sure to turn OFF the Passive / Automatic Arming Mode before delivering the vehicle to be serviced. As an alternative, the