INSTALLATION
Step 1: Testing the Camera (Bench Testing)
1.Prepare two sets of DC
2.Refer to the wiring diagram
3.When connecting the 20’ cable, make sure all connectors have been solidly connected.
4.Turn on the monitor and you should see a clear, color picture display.
5.If you do not see a picture or the picture quality is not satisfactory, please turn off the monitor and double check all the connectors to make sure they are securely connected.
6.Turn on the monitor again. If you are still unable to see the picture or the picture quality has not improved, contact your supplier for assistance.
Step 2: Checking the Power Source
1.The camera can only operate by connecting a power source of DC 11- 13V+ / 70mA type.
2.Check your vehicle and make sure you have the correct power source for the camera.
3.In most cases, the camera power line is connected with the reverse light power source.
1770 SOUTH TAPO STREET ª SIMI VALLEY, CALIFORNIA 93063
WWW.CRIMESTOPPER.COM
Page 3 of 6