TEMPERATURE CONTROLS
Cooling System On/Off Button | Indicator Lights |
TURNING THE COOLING SYSTEM ON AND OFF
You can disable the cooling system in your refrigerator by pressing the On/Off button located on the left side of the temperature control panel. To ensure that you do not accidentally turn off the cooling system, the button does not work unless you press and hold it for three seconds. Once you disable the cooling system, all refrigeration to the freezer and fresh food compartments stops. To turn the cooling system back on, you must again press and hold the On/Off button for three more seconds.
NOTE
Pressing the On/Off button on the control panel disables your refrigerator’s cooling system but does not disconnect power to lights and other electrical components. To turn off power to your refrigerator you must unplug the power cord from the wall outlet.
Each time you make settings on the control panel, a single audible tone acknowledges your input.
AIR FILTER INDICATOR & STATUS LIGHTS
Your refrigerator’s air filter needs to be replaced from time to time. You can monitor the need for replacement by referring to the status light while the air filter is “ON”. To turn on the air filter, press the “Air Filter” button. To turn off the air filter, press the “Air Filter” button. To RESET the air filter, press the “Air Filter” button and hold for 3 seconds.
RESPONDING TO ALARMS (Audible Tones & Indicator Lights)
Your refrigerator’s control system can convey the following information through audible tones and the alarm indicator lights.
Door | Flashing | 9 | Freezer or | Close door to disable and |
Ajar | Green |
| refrigerator door | reset alarm. |
has been open for over five minutes.
Air Filter Status Light (not available on all models)
Green | Filter OK. |
|
|
Yellow | Air filter is about 80 percent used. Please order new one. |
|
|
Red | Air filter is 100 percent used. Please change now. |
|
|
11
