Crosley 241824400 warranty Door Removal Instructions

		DOOR REMOVAL INSTRUCTIONS
		Tools Necessary:
Top	Top Hinge
Hinge			3/8”
Screw	Cover Screw	Adjustable	Fixed
	Bottom	Wrench	Wrench
	Hinge
	Screw

OR

Phillips™ head
and
Flat Head
Screw Driver	Socket
	Wrench Set

DOOR REMOVAL INSTRUCTIONS:

If it is necessary to move the refrigerator through narrow doorways, follow these steps to remove the doors.

Before you start:

1 Make sure the electrical power cord is unplugged from the wall outlet.

2Remove any food from the door shelves.

3 Close the doors.

To remove the hinge cover:

1Remove the three screws from the cover over the top door hinges.

2Pull the cover forward about a half inch and lift it off.

To remove the refrigerator door:

1Trace lightly around the door’s top hinge with a pencil. This makes reinstallation easier.

2 Remove the two screws from the top hinge. Lift the door off of the bottom hinge and set it aside.

3Remove the three bottom hinge screws and hinge, if necessary.

To remove the freezer door:

1Detach the multi-wire cable connector located above the top hinge. Grasp both sides of the connector firmly and pull apart.

2Trace lightly around the door’s top hinge with a pencil. This makes reinstallation easier.

3 Detach the water tube from the connector located below the freezer door. The connector releases when you press its outer sleeve inward.

4 Remove the screws from the top hinge and pull the multi-wire cable through it.

5Lift the door off of the bottom hinge. Lay the door on its side to avoid damage to the

Remove the three bottom hinge screws and hinge, if necessary.

To reinstall the refrigerator and freezer doors, reverse the above steps.

6