Olympus LS-14 How to enable pre-recording, While the recorder is in stop, Press the REC s button

Menu setting method

Pre-Recording

	Pre-recording enables you to record up to 2 seconds* of sound
	before you actually press the recording button. This function
	allows you, for example, to start recording birdsong up to 2
	seconds* before the bird starts singing even if you press the
	recording button at the moment the bird starts singing.
	[On]: For recording sound up to 2 seconds* before the
	recording button is pressed.
	[Off]: For normal recording start.
5	* Recording start time will vary according to
	[Rec Format] settings.
Menu	• To confirm the setting, press and hold the F3 (INFO)
	button at the [Home] screen (☞ P.23).
setting
	▌ How to enable pre-recording
method	To enable pre-recording, set [Pre-Recording] to [On].
	A
	This function is enabled when the Mode dial is
	switched to [MANUAL].
		While the recorder is in stop
	1 mode, press the REC (s) button.
		• The recorder enters recording pause mode.
		However, it constantly records ambient
	2	sound and holds up to 2 seconds of data,
		which is refreshed every second.
		Press the REC (s) button.

•The recorded data will include up to 2 seconds of sound recorded before the REC (s) button was pressed.

EN	• When the [Pre-Recording] function is used, the
68	following functions cannot be used.
	• [OVER DUB] (☞ P.35)

Rec Monitor

Select whether or not to output audio while recording from the earphone jack (EAR).

[On]: Enables the recording monitor function. Sound will be output from the EAR jack.

[Off]: Disables this function. Sound will not be output from the EAR jack.

•If the external speaker is connected while recording, there is a risk that audio feedback will occur. It is recommended that you use earphones to monitor recording, or turn [Rec Monitor] to [Off] while recording.

Smart Time

Set the automatic adjustment time to be used in [SMART] mode.

[10 sec.] [30 sec.] [1 min.]: Set the time for automatic adjustment.

[Endless]: Automatic adjustment will continue until you skip it.

Metronome

The metronome is a useful rhythm guide and can be used during recording. You can also set it while recording is paused. The metronome sound is not output from the speaker.

1 Select the metronome options.

[Tempo]: Set the metronome’s tempo.

[Sound]: Set the metronome’s sound.

[Beat]: Set the metronome’s pattern.

[Volume]: Set the metronome’s volume.