Olympus LS-12, LS-14 Ejecting an SD card, While the recorder is in stop mode, open the card cover

Models: LS-12 LS-14

1 100
Download 100 pages 20.1 Kb
Page 21
Image 21

Inserting and ejecting an SD card

Ejecting an SD card

1 While the recorder is in stop mode, open the card cover.

2 Push the SD card inward to unlock it, and let it eject partially.

 

The SD card is visibly out of the slot and can be

 

removed safely.

 

• If you eject the SD card when

 

[Memory Select] is set to [SD card],

3

[Memory Select] will automatically change

to [Internal memory selected].

Close the card cover securely.

 

SD card

When the write protection switch is set to [LOCK], you cannot record or erase files.

Notes

Quickly moving your finger away after pushing the SD card inward may cause it to eject forcefully out of the slot.

Some SD cards or SDHC cards may not be recognized correctly depending on the manufacturer or type of card due to compatibility issues with this recorder.

See the Olympus website for a list of SD cards that have been confirmed to operate with this recorder in conditions prescribed by Olympus. The website http://olympus-imaging.jp/ introduces manufacturers and types of SD cards confirmed to be compatible. Please note, however, this

is not meant to guarantee that SD cards will operate. Some SD cards may not be recognized correctly due to circumstances such as changes in manufacturer specifications.

Always read the instructions that come with your SD card before using it.

If an SD card is not recognized, remove the SD card and then insert it again to see if the recorder recognizes the SD card.

Processing speed may be slower with some types of SD cards. Processing performance may also be reduced due to repeated writing and deleting. If that happens, reformat the SD card (P.78).

1

Inserting and ejecting an SD card

Write protection switch

LOCK

EN

21

Page 21
Image 21
Olympus LS-12 Ejecting an SD card, While the recorder is in stop mode, open the card cover, Close the card cover securely