Olympus LS-12, LS-14 manual Using the tuning function

Using the tuning function

Adjust while looking at the tuning		Switch the Mode dial to a position
3 meter and the indicators.	4 other than [v] to exit the tuning
		mode.

•Tune accurately with the needle pointing to the center of the meter.

•The LED indicator lights will turn on as the instrument becomes tuned. When the instrument is in tune, the bar will be at the center of the meter, and the left and right LED indicator lights will turn on simultaneously.

The lights enable you to tune an instrument even when the display is in difficult lighting conditions.

•To change the calibration reference value, press the 9or 0button to select the frequency. The frequency of the reference tone A can be adjusted by 1 Hz increments in the range of 435 Hz to 445 Hz.

6

Using the tuning function

EN

81