Olympus LS-12, LS-14 manual Inserting batteries, Battery indicator

Inserting batteries

This recorder can be used with AA Alkaline Batteries.

1 Press the battery cover release button, and then slide the battery cover open while lightly pressing it down.

2 Insert the batteries, observing the correct =and -polarities.

3 Close the battery cover completely by pushing the cover downwards in direction A while sliding it in direction B.

Battery indicator

The battery indicator on the display changes as	1
the batteries lose power.
• When [N] appears on the display, replace	Inserting
the batteries as soon as possible.	batteries
When the batteries are too weak,
[Battery Low] will appear on the display and
the recorder will shut down.

Notes

•Manganese batteries may not be used in this recorder.

•Be sure to turn off the recorder before replacing the batteries. Unloading the batteries while the recorder is in use may cause a malfunction such as corrupting the file, etc. If you take out the batteries while recording, you will lose your currently recorded file because the file header will not be able to close.

•If it takes longer than 15 minutes to replace the dead batteries or if you take the batteries in and out repeatedly at short intervals, you may have to re-enter the battery and time settings.

•Remove the batteries if you are not going to use the recorder for an extended period of time.

•When you are playing a file from the built-in

speaker, the recorder may turn Loff depending on the volume level due to the reduced voltage output of the batteries even if [ ] is displayed in

the battery indicator. In this case, lower the volume of the recorder.

EN

15