Olympus LS-12 Press the OK button to complete the setting, Example March 24, Time & Date P.75

Setting the time and date [Time & Date]

Example: March 24, 2012

3M 24D 2012Y (Initial setting)

24D 3M 2012Y

2012Y 3M 24D

3 Press the OK button to complete the setting.

•The clock will start from the set date and time. Press the OK button when you want the clock to start.

Notes

•If you press the OK button during the setup operation, the recorder will save the items that were set to that point.

•After setup, a message will sound prompting you to select [Off], if voice guidance is not required and the screen will go into [Voice Guide] (☞ P.74) setup. If you don’t want the guidance feature, select [Off] (LS-14 only).

While the recorder is in stop mode at the [Home] screen, press and hold the STOP/w (4) button to display [Time & date] and [Remain]. If the current time and date are not correct, set them using the time and date setting. See “Changing the time and date

[Time & Date]” (☞ P.75).

1

Setting the time and date [Time & Date]

EN

19