Olympus LS-12, LS-14 manual You cannot delete folders with the recorder

Erasing

8 Press the + button to select [Start].

9 Press the OK button.

•The display changes to [Erasing!] and erasing starts.

•[Erased] is displayed when the file is erased. File numbers are reassigned automatically.

Notes

•You cannot recover a file once it has been erased. Please check carefully before erasing.

•When an SD card is inserted into the recorder, be sure to confirm the recording media as either

[Internal memory] or [SD card] so that there is no mistake (☞ P.23, P.72).

•Locked files and files set as read-only cannot be erased (☞ P.51).

•If the SD card is write-protected, [SD Card Locked] will be displayed. If you want to erase a file, please release the card’s write protection (☞ P.21).

•If there is a file that cannot be recognized by the recorder, the file will not be erased. Please connect the recorder to your PC to erase the file.

•Replace the battery with a new one in order to ensure that the battery does not go flat during erasing. In addition, it may take over 10 seconds to complete erasing. Never perform operations such as the following during erasing, as such operations may damage the data.

1 Disconnect the AC Adapter during erasing.

2 Remove the battery during erasing.

3 Remove the SD card during erasing when [SD card] is selected as the recording media.

•You cannot delete folders with the recorder.

4

Erasing

EN

63