Olympus LS-12 Connect earphones to the EAR jack of the recorder, Select a file to dub over P.25

Recording

Using the overdubbing function

The overdubbing function enables you to dub sound over a file while listening to it. The recorded file is saved under a different name. This is useful when practicing songwriting and musical instruments.

	4
	6
5	7

A

When using the overdubbing function, the following conditions must be met:

•Select a (.wav) file with the format

[PCM 44.1kHz/16bit] as the file to be played (☞ P.25, P.60).

•Set [Rec Format] to [PCM 44.1kHz/16bit](☞ P.66).

1 Switch the Mode dial to the [QUICK] or [MANUAL] position (☞ P.28, P.30).

2	• This function is not enabled when the Mode
	dial is set to [SMART].
	Select a file to dub over (☞ P.25).

3 Connect earphones to the EAR jack of the recorder.

•The file to be dubbed over will be played back through the EAR jack.

To EAR jack

•Set [Rec Monitor] to [On] (☞ P.68).

4 While the recorder is in stop mode, press the F3 (OVER DUB) button.

•If the Mode dial is set to [QUICK], recording and playback will start simultaneously. Proceed to Step 7.

•If the Mode dial is set to [MANUAL], playback will start first.

a

aOverdubbing

2

Recording

EN

35