![Turntable Operation](/images/new-backgrounds/28503/285037x1.webp)
Turntable Operation
Turntable Operation
1 Turn the unit on by switching the ON/OFF VOLUME KNOB (11) to the ON position. The POWER LIGHT INDICATOR (6) will come on.
2 Use the CUE LEVER (5) to raise the tone arm. Move the TONE ARM (12) by hand over the record and slowly lower it using the CUE LEVER
(5). Adjust the volume to the desired level by turning the ON/OFF VOLUME KNOB (11).
3 At the end of the record, the tone arm will automatically return to its rest. The red power light will remain on until the unit is turned off.
Tone Control
Use the Tone control to adjust the sound quality.
6
Accessory: ADAPTER FOR 45 RPM
To play the 45 rpm record, place the adapter on the center of the turntable.
This unit includes ONE (1) adapter found in the polybag of the instruction manual.
Welcome
Thank you for purchasing the Empire Turntable (CR46). Before operating this unit, please read this manual thoroughly and retain it for future reference.
About This Manual
Instructions in this manual describe the control functions of the CR46.
Table of Contents |
|
Getting Started |
|
Control Locators | 4 |
Unpacking | 5 |
Power Source | 5 |
Turntable Operation |
|
Turntable Operation | 6 |
Tone Control | 6 |
Accessory: Adapter for 45 rpm |
|
...................................................... | 6 |
General |
|
Troubleshooting Guide | 7 |
Warranty | 8 |