General Care & Cleaning
Ceramic Glass Cooktop Cleaning & Maintenance (cont’d)
Do not use the following on the ceramic glass cooktop:
• Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads. They may scratch the cooktop, making it more difficult to clean.
• Do not use harsh cleaners, such as chlorine bleach, ammonia or oven cleaners, as they may etch or discolor the cooktop.
•Do not use dirty sponges, cloths or paper towels, as they can leave soil or lint on the
cooktop which can burn and cause discoloration.
Special Caution for Aluminum Use on the Ceramic Cooktop
•Aluminum Foil - Use of aluminum foil on a hot cooktop will damage the ceramic cooktop. Do not use thin aluminum cooking utensils or allow aluminum foil to touch the ceramic cooktop under ANY circumstances.
•Aluminum utensils - The melting point of aluminum is much lower than that of other metals. Care must be taken when aluminum pots or pans are used on the cooktop. If allowed to boil dry, not only will the utensil be destroyed, but it may fuse to, break or mark the ceramic glass surface, permanently damaging the cooktop surface.
Cleaning the Oven Bottom
The bake element is designed to be gently tilted up using your hand from the front of the bake element. This will allow easier access to the oven bottom for cleaning. Be careful not to raise the element more than 4 or 5 inches from the resting position.
Care & Cleaning of Stainless Steel
Some models are equipped with stainless steel exterior parts. Special care and cleaning are required for maintaining the appearance of stainless parts. Please refer to the Cleaning Chart provided at the beginning of the General Care & Cleaning section in this Use & Care Manual.
The baking element may be tilted about 4 or 5 inches to clean the oven bottom.
Changing the Interior Oven Light (some models)
On some models, the oven light automatically turns on when the door is opened. Some models have a switch located on the control panel to turn on the light. The oven light is located at the rear of the oven.
To replace the oven light:
1.Turn electrical power off at the main source or unplug the range.
2.Replace bulb with a new 40 watt appliance bulb.
3.Turn power back on again at the main source (or plug the range back in).
4.The clock will then need to be reset. To reset, see Setting Oven Controls in this Use & Care Manual.
Be sure the range is unplugged and all parts are COOL before replacing oven light. Wear a
11
