Operation
Turntable Operation
1Turn the unit on by rotating the ON/OFF- VOLUME KNOB (7) clockwise.
2Set the SPEED CONTROL SWITCH (4) to to the correct speed (33 1/3,45 or 78 rpm).
3Place the record on the turntable.
4Use the CUE LEVER (2) to raise the tone arm off its rest. Move the tone arm over the record and use the cue lever to lower it onto the record. The record will begin to turn automatically.
5At the end of the record, the tone arm will return to its rest.
USB Operation
Using the included software and cable, the USB connection allows you record your records onto your computer. Follow these instructions to use the USB.
1Insert the enclosed software CD into your computer.
2Follow the instructions on the computer screen to install the software. If the software does not load automatically, browse the CD and open the Read Me folder for further instructions.
3Connect the small end of the USB cable to the USB JACK (15) on the back of the unit.
4Connect the other end to a USB port on your computer.
5On your computer, open the Record Recording Software.
6For instructions on operating the Record Recording Software, browse the software CD and open the Read Me folder.
6
Accessory: ADAPTER FOR 45 RPM
This adaptor allows you to play 45 RPM records.
1Place the 45 RPM adaptor over the spindle.
2Gently place your 45 RPM record onto the turntable.
3Follow the steps under turntable operation to play your record.
Welcome
Thank you for purchasing the Crosley Keepsake (CR249). Before operating this unit, please read this manual thoroughly and retain it for future reference.
About This Manual
Instructions in this manual describe the control functions of the CR249.
Included in this package:
·Keepsake USB Turntable
·Record Recording Software
·USB Cable
·45rpm Adapter
Table of Contents |
|
Getting Started |
|
Unpacking | 4 |
Power Source | 4 |
Control Locators | 5 |
Operation |
|
General | 6 |
USB/Recording | 6 |
General |
|
Troubleshooting Guide | 7 |
Warranty | 8 |
3
