Turntable Operation
Turntable Operation
Turn the unit on by turning the
1 Press the PHONO BUTTON (4) to select PHONO mode.
2 Set the SPEED CONTROL SWITCH (13) to desire speed (33 1/3,45 or 78 rpm). Place the record on the TURNTABLE (15).
3 Pull the TONE ARM (12) slightly to the right side until hear the “click” sound to activate the turntable.
4 Move the TONE ARM (12) by hand to the record and slowly lower it to the desired starting point. Turn the VOLUME CONTROL KNOB (3) to adjust the volume to the desired level.
5 At the end of the record, the TONE ARM (12) will stop automatically. You must return the TONE ARM (12) to TONE ARM REST (14) by hand.
6
Accessory: ADAPTER FOR 45 RPM
To play a 45 rpm record, place the ADAPTER (11) on the spindle and place the record over the adapter.
Welcome
Thank you for purchasing the Crosley The AutoRama with Radio (CR711). Before operating this unit, please read this manual thoroughly and retain it for future reference.
About This Manual
Instructions in this manual describe the control functions of the CR711.
Table of Contents
Getting Started & Basic Operation
Control Locators | 4 |
Unpacking | 5 |
Set Up | 5 |
Power Up Your Crosley | 5 |
Turntable Operation |
|
Setting Turntable Speed | 6 |
Playing A Record | 6 |
Radio Operation |
|
Radio Operation | 7 |
Antenna | 7 |
General |
|
Auxiliary Outputs | 7 |
Troubleshooting Guide | 8 |
Warranty | 9 |
