WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER. PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Radio Operation
1 Press the FM BUTTON (5) or the AM BUTTON
(6) to select the desired radio band.
Radio Operation
Auxiliary Outputs
1 You can connect your radio to different sources using the auxiliary outputs.
The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute risk of electric shock
to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is intended to alert user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appliance.
2 Turn the TUNING KNOB (7) to set the desired station.
3
4 Adjust the VOLUME KNOB (3) to the desired sound level.
Antenna
Antenna: for FM reception, the unit is provided with a FM WIRE ANTENNA (10) , move the wire until the reception is clear and with no interferences. For AM reception, the unit is provided with a directional
2 Connect the auxiliary cables to the LINE OUT JACK (8) to the auxiliary inputs on the desired component. See the owner’s manual for the operating instructions for the desired component. The LINE OUT JACK (8) only puts out a signal and will not run external speakers without using a separate amplified source.
CAUTION
For Compact Disc Units Only:
INVISBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPORSURE TO LASER BEAM.
Specification
Frequency Range | : AM 525 - 1710 KHz |
| : FM 87.5 - 108.5 MHz |
Power Consumption | : 17 Watts |
Antennas | : External FM antenna |
| : |
Power Source | : AC 120V ~ 60 Hz |
Speaker | : 4” Dynamic type X 2 |
Speaker Wattage | : 5 Watts |
Speaker ohms | : 4 ohms |
Output ohms | : 4 ohms |
Output Wattage | : 2 Watts per channel |
position in which the best reception is obtained. Do not connect the FM WIRE ANTENNA (10) to any outside antenna.
* DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. | 7 |