WARNING:
Connecting Optional Equipment
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER. PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
External Speakers
1 This radio is equipped with external speaker outputs.
External Speakers
1 You can connect your radio to different sources using the auxiliary outputs.
The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute risk of electric shock
to persons.
CAUTION
RISK OF ELECTRIC
SHOCK
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is intended to alert user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appliance.
2 The speaker jacks for external speakers are located on the back of the radio. Beside the speaker jacks is a switch labeled (int./ext.) When using external speakers, this switch must be switched to the ext. position. Doing this turns off the internal speakers in the radio and redirects to power to the external speakers.
3 If you decide not to use the external speakers, be sure the switch is on int. or the internal speakers will not work.
2 Connect auxiliary cables to the LINE OUT JACK (29) to the auxiliary inputs on the desired component. See the owners manual for the operating instructions on the desired component. The LINE OUT JACK only puts out a signal. Hooking up external speakers alone must be hooked up using the External Speaker Jacks.
CAUTION
For Compact Disc Units Only:
INVISBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPORSURE TO LASER BEAM.
Specification
Frequency Range | : AM 520 - 1710 KHz |
| : FM 87.5 - 108.5 MHz |
Power Supply | : AC 120V ~ 60Hz |
Power Consumption | : 18W |
Speed | : 33 /45 /78 RPM |
Speaker | : 3” X 5” 8ohm 5W x 2 |
* DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
11
