Crosley Radio CR73 instruction manual Turntable Operation, Power Source

5 Open lid and remove styrofoam shipping material from turntable.

6 Remove black tie-wrap from under the tone arm.

7 Remove white protective needle cover by gently pulling towards the front of the unit.

8 Untie the FM antenna and allow it to hang down in a straight line for optimum FM reception. If you have trouble tuning in an FM station, move the external FM antenna for best reception. Do no connect FM antenna to outside antenna.

6

Remove plastic safety cover from A/C plug.

Remove plastic bag covering radio.

2

3

4 Remove tie from A/C cord and untie antenna wire on back of radio.

Remove packing materials from unit. Note: Save all packing materials.

1

Getting Started

Unpacking

Power Source

1 Unwind the AC POWER CORD (29) at the back of the unit and connect it to a power outlet.

2 Plug A/C cord into appropriate outlet.

AC

Polarized Plug

Note: This product may be equipped with a polaized alternating-current line plug (a plug having one blade wider than the other.) This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet try reversing the plug, if the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

3 This product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature, If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact you electrician to replace your obsolete outlet. Do not defeat the purpose of the polarized plug.

Turntable Operation

Press the unit on by switching the ON/OFF-VOLUME ROTARY KNOB (9) located on the front panel to the ON position.

1 Select the FUNCTION SWITCH (8) to select PHONO mode.

2 Set the SPEED CONTROL SWITCH (26) to desire speed (33 1/3,45 or 78 rpm). Place the record on the turntable.

3 Pull the TONE ARM (25) slightly to the right side until hear the “click” sound to activate the turntable.

4 Move the TONE ARM(25) by hand to the record and slowly lower it to the desired starting point. Turn the VOLUME KNOB(9) to adjust the volume to the desired level.

Turntable Operation

Accessory: ADAPTER FOR 45 RPM

TO PLAY THE 45RPM RECORD, PLACE THE ADAPTER (24) ON THE SPINDLE (22).

7