Crown Audio 140MPA operation manual Specifications, KHz with 0.5% THD

Commercial Audio Series Mixer-Amplifiers

5 Specifications

Minimum Guaranteed Power	140MPA
1 kHz with 0.5% THD
Minimum guaranteed power into 4 ohms or 25V/70V output	40W
Performance
Number of input channels	4
Number of power amplifiers	1
Input Sensitivity (volts RMS) for full output at maximum gain
Balanced mic inputs	3 mV
	800 mV
Balanced line inputs
	400 mV
RCA connectors
Frequency Response (at 1 watt from 8-ohm tap, 50 Hz - 15 kHz)	± 1 dB
Frequency Response (at line out, 50 Hz to 15 kHz)	± 1 dB
Power Bandwidth (at 8-ohm tap, 2 dB below maximum 1 kHz power)	50 Hz to 20 kHz with < 0.5% THD
Signal to Noise Ratio (ref. to rated power, master volume at minimum)	> 90 dB
Total Harmonic Distortion (THD) at rated power at 1 kHz	< 0.5%
DC Output Offset	< ± 5 mV
Input Impedance (nominal)	Mic: 400 ohms, Line: 100 kilohms,
	RCA: 50 kilohms
Crosstalk (all controls at “10”)	–70 dB at 1 kHz
Line Output Level (nominal)	1V into 10 kilohms
Phantom Power	15 VDC
AC Line Voltages Available	120V, 60 Hz.
	Line voltage tolerance +15%, –20%
Operating Temperature/Humidity	0o C to 40o C at 95% relative humidity
	(non-condensing)
Storage Temperature	–20oC to 85o C
Construction
Cooling	Convection cooled
Dimensions	Width without rack ears: 17.3 in. (43.8 cm)
	Width with rack ears: EIA Standard 19 in. W (EIA RS-310-B)
	Height of front panel: 3.5 in. (8.9 cm)
	Height including feet: 4.1 in. (10.5 cm)
	Depth from front panel to back panel: 12.2 in. (31.0 cm)
	Depth from front of knobs to back of non-touch cover:
	13.9 in. (35.2 cm)
Net Weight, Shipping Weight	17 lb (7.7 kg), 22 lb (9.98 kg)

Operation Manual page 15