Commercial Audio Series
2 Setup
1.2Front Panel Controls and Indica- torsA.Input Signal Presence/Clip Indica- tors: Green LED, one above each channel's volume control, illuminates when input signal exceeds
B.Master Output Volume Control: Detented potentiometer with knob.
C. Output Signal Presence Indicator: Green LED above master output volume control illuminates when any input signal exceeds
D. Output Signal Clip Indicator: Red LED above master output volume control flashes brightly at threshold of audible distortion.
E. Power Indicator: Blue LED indicatespower on.
F. Input Volume Controls: One per input, detented potentiometers with knobs. Four controls in 160MA; three controls in 135MA.
G. Tone Controls: Bass and Treble non- detented recessed potentiometers under master output volume control. Bass ±10 dB at 100 Hz, Treble ±10 dB at 10 kHz.
H.Power Switch: Pushbutton
.
AB C D E
F | G | H |
Figure 1.1 Front Panel Controls and Indicators |
|
|
page 6 |
| Operation Manual |