P U L S E S E R I E S
PULSE 2X1100
The Pulse Series amplifiers are high per- formance professional power amplifiers capable of delivering major power output
from a new generation of switched mode power supplies. All Pulse Series amplifiers are housed in the same size 2U cases and feature light, powerful switching power supplies along with massive heatsinks and two
Pulse Series amplifiers are as equally at home in critical fixed installations and in demand- ing, live touring sound environments. Capable of maintaining excellent performance when being driven to their limit with real loud- speaker loads, Pulse amplifiers are solid and
Features
•Switch Mode Power Supply delivers great performance without the weight.
•Microprocessor supervision of power sup- plies provides overall system protection.
•Accurate
•Choice of balanced XLR,
•Choice of Speakon® and/or binding post outputs.
•All this performance and reliability in only 2 rack spaces.
At Crown, sonic performance is always in the forefront of our minds. Like all Crown amps, Pulse Series amplifiers have undergone rigor- ous testing in order to ensure their sonic qual- ity and reliability. And every Pulse amplifier is backed by Crown’s unequaled
For more details about the Pulse Series, con- tact the Crown Technical Support Group at
Specifications
Input Sensitivity: +1 dBu for full output.
Input Impedance: 20 kohm.
Input Connectors:
Distortion: <0.006% THD, 1 kHz, 1 dB below clip, 22 kHz measurement bandwidth.
Frequency Response: 20 Hz to 20 kHz,
Controls: Power switch, bridge mode switch, detented level controls (these may be made
Power
Output Power:
2x1100 | *1 kHz | |
Power | ||
Dual (per channel) | 1500W** | |
Dual (per channel) | 1100W | |
Dual (per channel) | 700W | |
3000W** | ||
2200W |
*1 kHz Power: refers to maximum average power in watts at 1 kHz with 0.1% THD+N.
**Note: 2 ohm dual and 4 ohm bridge are at 1% THD.
Indicators: AC Present, Operate, Signal, Bridge, Clip, Temp, Fault.
Protection (microprocessor supervised): Over- temperature, DC on outputs, output stage over- load, inrush current surge, power fail and brownout.
Noise:
Slew Rate: >50 V/microsecond.
Damping Factor: >200 ref. 8 ohm.
Output Connectors: Binding post and Speakon®.
AC Power: 230 volts AC nominal, 2200VA, all channels driven.
Dimensions: 89 mm (3.5 in.) x 460 mm (18.2 in.) x 483 mm (19 in.).
Weight: 11 kg (24 lbs.).
Crown’s
Crown offers a
See your authorized Crown dealer for full warranty disclosure and details. For customers outside of the USA, please contact your authorized Crown distributor for warranty information or call
Crown International
P.O. Box 1000
Elkhart, IN
TEL:
FAX:
www.crownaudio.com
Specifications subject to change without prior notice. Latest information available at www.crownaudio.com.
Crown is a registered trademark of Crown International. Other trademarks are the property of their respective owners. Printed in U.S.A.
© 2001 Crown Audio, Inc.
08/01 |