Patton electronic 1069 Warranty Information, REGULATORY INFORMATION EMC Directive, Pstn

1.0 WARRANTY INFORMATION

Patton Electronics warrants all Model 1069 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of the shipment.

This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modification. If this product fails or does not performs as warranted, your sole recourse shall be repair or replacement as described above. Under no condition shall Patton Electronics be liable for any damages incurred by the use of this product. These damages include, but are not limited to, the following: lost profits, lost savings and incidental or consequential damages arising from the use of or inability to use this product. Patton Electronics spe- cifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemed an acceptance of these terms by the user.

Note Conformity documents of all Patton products can be viewed online at www.patton.com under the appropriate product page.

1.1 REGULATORY INFORMATION

EMC Directive:

•FCC Part 15, Class A

•EN55022, Class A

•EN55024

Low-Voltage Direcive (Safety):

•IEC/EN60950-1, 2nd Edition

•AS/NZS 60950-1

PSTN:

• This device is not intended nor approved for connection to the PSTN

1.2 RADIO AND TV INTERFERENCE (FCC PART 15)

This device generates and uses radio frequency energy, and if not installed and used properly-that is, in strict accordance with the manufac- turer’s instructions-may cause interference to radio and television recep- tion. The device has been tested and found to comply with the limits for a Class A computing device in accordance with specifications in Subpart B

3