Contents
MODEL
REGULATORY MODEL NUMBER 03342D4-001
USER MANUAL
OnSite VDSL2 CPE
Installation
CONTENTS
Warranty Information
Configuration
1.1 REGULATORY INFORMATION EMC Directive
1.0 WARRANTY INFORMATION
Low-Voltage Direcive Safety
PSTN
1.4 AUTHORIZED EUROPEAN REPRESENTATIVE
1.5 SERVICE
1.3 CE DECLARATION OF CONFORMITY
Tel +1 301 Email support@patton.com
power plugs L1, L2 & GND or Hot, Neutral
1.6 SAFETY WHEN WORKING WITH ELECTRICITY
For AC powered devices which have 3 conductor
must have an earth ground
Electrostatic Discharge ESD can damage equipment and impair electrical circuitry. It occurs when electronic printed circuit cards are improperly handled and can result in complete or intermittent failures. Do the fol- lowing to prevent ESD
2.2 DESCRIPTION
2.1 FEATURES
2.0 GENERAL INFORMATION
Figure 2. Model 1069 and VDSL DSLAM application
2.3 APPLICATION
Figure 1. Model 1069 rear panel
external use and shall be rated for the proper applica
3.0 INSTALLATION The Interconnecting cables shall be acceptable for
CAUTION perature, flammability, and mechanical serviceability
tion with respect to voltage, current, anticipated tem
CAUTION perature, flammability, and mechanical serviceability
3.1 CONNECTING THE LINE INTERFACE
The Interconnecting cables shall be acceptable for
external use and shall be rated for the proper applica
The Interconnecting cables shall be acceptable for
3.2 CONNECTING THE 10/100BASE-T ETHERNET INTERFACE
3.3 CONNECTING THE POTS/ISDN LINE
CAUTION perature, flammability, and mechanical serviceability
The Interconnecting cables shall be acceptable for
3.4 CONNECTING POWER
4.0 CONFIGURATION
CAUTION perature, flammability, and mechanical serviceability
5.1 FRONT PANEL LED STATUS MONITORS
Power
5.0 OPERATION
Status
A.6 TEMPERATURE RANGE
A.4 LED STATUS INDICATORS
A.5 POWER SUPPLY
A.8 DIMENSIONS
Power Supplies
APPENDIX B
Patton Model #
Power Adapters
C.2 VDSL2 INTERFACE RJ-45
APPENDIX C
C.1 10/100BASE-T INTERFACE RJ-45
C.3 POTS/ISDN INTERFACE RJ-45