Contents
USER MANUAL
REGULATORY MODEL NUMBER 03342D4-001
MODEL
OnSite VDSL2 CPE
Warranty Information
CONTENTS
Installation
Configuration
Low-Voltage Direcive Safety
1.0 WARRANTY INFORMATION
1.1 REGULATORY INFORMATION EMC Directive
PSTN
1.3 CE DECLARATION OF CONFORMITY
1.5 SERVICE
1.4 AUTHORIZED EUROPEAN REPRESENTATIVE
Tel +1 301 Email support@patton.com
For AC powered devices which have 3 conductor
1.6 SAFETY WHEN WORKING WITH ELECTRICITY
power plugs L1, L2 & GND or Hot, Neutral
must have an earth ground
Electrostatic Discharge ESD can damage equipment and impair electrical circuitry. It occurs when electronic printed circuit cards are improperly handled and can result in complete or intermittent failures. Do the fol- lowing to prevent ESD
2.0 GENERAL INFORMATION
2.1 FEATURES
2.2 DESCRIPTION
Figure 1. Model 1069 rear panel
2.3 APPLICATION
Figure 2. Model 1069 and VDSL DSLAM application
CAUTION perature, flammability, and mechanical serviceability
3.0 INSTALLATION The Interconnecting cables shall be acceptable for
external use and shall be rated for the proper applica
tion with respect to voltage, current, anticipated tem
The Interconnecting cables shall be acceptable for
3.1 CONNECTING THE LINE INTERFACE
CAUTION perature, flammability, and mechanical serviceability
external use and shall be rated for the proper applica
3.3 CONNECTING THE POTS/ISDN LINE
3.2 CONNECTING THE 10/100BASE-T ETHERNET INTERFACE
The Interconnecting cables shall be acceptable for
CAUTION perature, flammability, and mechanical serviceability
4.0 CONFIGURATION
3.4 CONNECTING POWER
The Interconnecting cables shall be acceptable for
CAUTION perature, flammability, and mechanical serviceability
5.0 OPERATION
Power
5.1 FRONT PANEL LED STATUS MONITORS
Status
A.5 POWER SUPPLY
A.4 LED STATUS INDICATORS
A.6 TEMPERATURE RANGE
A.8 DIMENSIONS
Patton Model #
APPENDIX B
Power Supplies
Power Adapters
C.1 10/100BASE-T INTERFACE RJ-45
APPENDIX C
C.2 VDSL2 INTERFACE RJ-45
C.3 POTS/ISDN INTERFACE RJ-45