Manuals / Patton electronic / Computer Equipment / Modem

Patton electronic 1069 user manual General Information, Features, Description

Models: 1069

1 16

Download 16 pages 2.78 Kb

Page 7

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for one year for parts and labor. If any questions or problems arise during installation or use of this product, contact Patton Electronics Technical Support at +1 (301) 975-1007.

2.1 FEATURES

•VDSL2 - Easy to configure

•Auto-MDIX Ethernet

•Configurable 10/100, Full/Half, and Auto-Negotiating Ethernet

•Extends up to 4x 10/100Base-TX Ethernet beyond 328-foot (100- meter) limitation over a single twisted-pair or Cat5+

•Symmetric or asymmetric settings

•POTS/ISDN splitter on board

•Transparent operation

•LED indicators for Power, DSL Link, Ethernet Link/Activity, Remote and Local

2.2 DESCRIPTION

The Patton Electronics Model 1069 OnSite CPE provides high-speed VDSL2 connections to any standards-based VDSL2 DSLAM.

The Model 1069 can automatically forward LAN broadcasts, multicasts, and frames across a 2-wire voice-grade twisted-pair link. The data is passed transparently (unmodified) through the 1069. The 1069 automati- cally adds and deletes MAC addresses, only passing packets across the VDSL2 link.

Figure 1 on page 8 describes the rear panel ports on the Model 1069

VDSL CPE.

7

Image 7

Patton electronic 1069 user manual General Information, Features, Description

Contents

OnSite VDSL2 CPE REGULATORY MODEL NUMBER 03342D4-001USER MANUAL MODELConfiguration CONTENTSWarranty Information InstallationPSTN 1.0 WARRANTY INFORMATIONLow-Voltage Direcive Safety 1.1 REGULATORY INFORMATION EMC DirectiveTel +1 301 Email support@patton.com 1.5 SERVICE1.3 CE DECLARATION OF CONFORMITY 1.4 AUTHORIZED EUROPEAN REPRESENTATIVEmust have an earth ground 1.6 SAFETY WHEN WORKING WITH ELECTRICITYFor AC powered devices which have 3 conductor power plugs L1, L2 & GND or Hot, NeutralElectrostatic Discharge ESD can damage equipment and impair electrical circuitry. It occurs when electronic printed circuit cards are improperly handled and can result in complete or intermittent failures. Do the fol- lowing to prevent ESD 2.0 GENERAL INFORMATION 2.1 FEATURES2.2 DESCRIPTION Figure 1. Model 1069 rear panel 2.3 APPLICATIONFigure 2. Model 1069 and VDSL DSLAM application tion with respect to voltage, current, anticipated tem 3.0 INSTALLATION The Interconnecting cables shall be acceptable forCAUTION perature, flammability, and mechanical serviceability external use and shall be rated for the proper applicaexternal use and shall be rated for the proper applica 3.1 CONNECTING THE LINE INTERFACEThe Interconnecting cables shall be acceptable for CAUTION perature, flammability, and mechanical serviceabilityCAUTION perature, flammability, and mechanical serviceability 3.2 CONNECTING THE 10/100BASE-T ETHERNET INTERFACE3.3 CONNECTING THE POTS/ISDN LINE The Interconnecting cables shall be acceptable forCAUTION perature, flammability, and mechanical serviceability 3.4 CONNECTING POWER4.0 CONFIGURATION The Interconnecting cables shall be acceptable forStatus Power5.0 OPERATION 5.1 FRONT PANEL LED STATUS MONITORSA.8 DIMENSIONS A.4 LED STATUS INDICATORSA.5 POWER SUPPLY A.6 TEMPERATURE RANGEPower Adapters APPENDIX BPatton Model # Power SuppliesC.3 POTS/ISDN INTERFACE RJ-45 APPENDIX CC.1 10/100BASE-T INTERFACE RJ-45 C.2 VDSL2 INTERFACE RJ-45