Manuals / Patton electronic / Computer Equipment / Modem

Patton electronic 1069 Appendix A, A.1 VDSL2, A.2 LAN CONNECTION, A.3 TRANSMISSION LINE

Models: 1069

1 16

Download 16 pages 2.78 Kb

Page 14

Image 14

APPENDIX A

SPECIFICATIONS

A.1 VDSL2

• Full compliance up to 30Mhz profile

A.2 LAN CONNECTION

• Four RJ-45, 10/100Base-T, IEEE 802.3 Ethernet

A.3 TRANSMISSION LINE

•Two-wire unconditioned twisted pair

•VDSL2 Connector: RJ-45

A.4 LED STATUS INDICATORS

•Power (Green)

•VDSL2: Link (Green)

•Local (Green)

•Remote (Green)

•Ethernet: Link (Green) & Activity (Flashing Green)

A.5 POWER SUPPLY

External AC and DC options:

•AC: 120 VAC, 220 VAC, and UI (120–240 VAC)

•DC: 12 VDC, 24 VDC and 48 VDC

•Power consumption: 400mA at 12VDC

A.6 TEMPERATURE RANGE

0–50°C

A.7 HUMIDITY

Up to 90% non-condensing.

A.8 DIMENSIONS

6.22 W x 1.25 H x 4.75 D in. (157 W x 318 H x 120 D mm)

Page 14

Image 14

Patton electronic 1069 Appendix A, A.1 VDSL2, A.2 LAN CONNECTION, A.3 TRANSMISSION LINE, A.4 LED STATUS INDICATORS

Contents

MODEL REGULATORY MODEL NUMBER 03342D4-001USER MANUAL OnSite VDSL2 CPEInstallation CONTENTSWarranty Information Configuration1.1 REGULATORY INFORMATION EMC Directive 1.0 WARRANTY INFORMATIONLow-Voltage Direcive Safety PSTN1.4 AUTHORIZED EUROPEAN REPRESENTATIVE 1.5 SERVICE1.3 CE DECLARATION OF CONFORMITY Tel +1 301 Email support@patton.compower plugs L1, L2 & GND or Hot, Neutral 1.6 SAFETY WHEN WORKING WITH ELECTRICITYFor AC powered devices which have 3 conductor must have an earth groundElectrostatic Discharge ESD can damage equipment and impair electrical circuitry. It occurs when electronic printed circuit cards are improperly handled and can result in complete or intermittent failures. Do the fol- lowing to prevent ESD 2.2 DESCRIPTION 2.1 FEATURES2.0 GENERAL INFORMATION Figure 2. Model 1069 and VDSL DSLAM application 2.3 APPLICATIONFigure 1. Model 1069 rear panel external use and shall be rated for the proper applica 3.0 INSTALLATION The Interconnecting cables shall be acceptable forCAUTION perature, flammability, and mechanical serviceability tion with respect to voltage, current, anticipated temCAUTION perature, flammability, and mechanical serviceability 3.1 CONNECTING THE LINE INTERFACEThe Interconnecting cables shall be acceptable for external use and shall be rated for the proper applicaThe Interconnecting cables shall be acceptable for 3.2 CONNECTING THE 10/100BASE-T ETHERNET INTERFACE3.3 CONNECTING THE POTS/ISDN LINE CAUTION perature, flammability, and mechanical serviceabilityThe Interconnecting cables shall be acceptable for 3.4 CONNECTING POWER4.0 CONFIGURATION CAUTION perature, flammability, and mechanical serviceability5.1 FRONT PANEL LED STATUS MONITORS Power5.0 OPERATION StatusA.6 TEMPERATURE RANGE A.4 LED STATUS INDICATORSA.5 POWER SUPPLY A.8 DIMENSIONSPower Supplies APPENDIX BPatton Model # Power AdaptersC.2 VDSL2 INTERFACE RJ-45 APPENDIX CC.1 10/100BASE-T INTERFACE RJ-45 C.3 POTS/ISDN INTERFACE RJ-45