Contents
OnSite VDSL2 CPE
REGULATORY MODEL NUMBER 03342D4-001
USER MANUAL
MODEL
Configuration
CONTENTS
Warranty Information
Installation
PSTN
1.0 WARRANTY INFORMATION
Low-Voltage Direcive Safety
1.1 REGULATORY INFORMATION EMC Directive
Tel +1 301 Email support@patton.com
1.5 SERVICE
1.3 CE DECLARATION OF CONFORMITY
1.4 AUTHORIZED EUROPEAN REPRESENTATIVE
must have an earth ground
1.6 SAFETY WHEN WORKING WITH ELECTRICITY
For AC powered devices which have 3 conductor
power plugs L1, L2 & GND or Hot, Neutral
Electrostatic Discharge ESD can damage equipment and impair electrical circuitry. It occurs when electronic printed circuit cards are improperly handled and can result in complete or intermittent failures. Do the fol- lowing to prevent ESD
2.1 FEATURES
2.0 GENERAL INFORMATION
2.2 DESCRIPTION
2.3 APPLICATION
Figure 1. Model 1069 rear panel
Figure 2. Model 1069 and VDSL DSLAM application
tion with respect to voltage, current, anticipated tem
3.0 INSTALLATION The Interconnecting cables shall be acceptable for
CAUTION perature, flammability, and mechanical serviceability
external use and shall be rated for the proper applica
external use and shall be rated for the proper applica
3.1 CONNECTING THE LINE INTERFACE
The Interconnecting cables shall be acceptable for
CAUTION perature, flammability, and mechanical serviceability
CAUTION perature, flammability, and mechanical serviceability
3.2 CONNECTING THE 10/100BASE-T ETHERNET INTERFACE
3.3 CONNECTING THE POTS/ISDN LINE
The Interconnecting cables shall be acceptable for
CAUTION perature, flammability, and mechanical serviceability
3.4 CONNECTING POWER
4.0 CONFIGURATION
The Interconnecting cables shall be acceptable for
Status
Power
5.0 OPERATION
5.1 FRONT PANEL LED STATUS MONITORS
A.8 DIMENSIONS
A.4 LED STATUS INDICATORS
A.5 POWER SUPPLY
A.6 TEMPERATURE RANGE
Power Adapters
APPENDIX B
Patton Model #
Power Supplies
C.3 POTS/ISDN INTERFACE RJ-45
APPENDIX C
C.1 10/100BASE-T INTERFACE RJ-45
C.2 VDSL2 INTERFACE RJ-45