Fig. 3
Fig. 4
Fig. 5b
Fig. 5a
sensitivity shall be 10 mV/Pa. Equivalent noise level shall be 28 dBA SPL typical; SPL for 3% THD shall be 120 dB. The micro- phone output shall be balanced, low imped- ance, with RFI and static protection.
A
12 to 48 volts DC, positive voltage on pins
2 and 3 with respect to pin 1 of output con- nector. Finish shall be black
CM-30
CM-30W
Warranty
Crown professional microphones are guaran- teed against malfunction for a period of three years from date of original purchase. See enclosed warranty sheet for additional informa- tion.
Service
If the microphone does not function properly, verify that it is placed correctly and is connect- ed as described in the Operating Instructions. Also check mic cables and your power supply. If service is required, return the microphone and electronics in their original packaging to:
Crown Factory Service, 1718 W. Mishawaka Road, Elkhart, IN 46517-9439.
A Service Return Authorization (SRA) is re- quired for product being sent to the factory for service. An SRA can be completed on line at www.crownaudio.com/support/factserv.htm.
Note: The mic and its electronics are a matched pair. For service both parts must be returned. For further assistance or technical support call
Crown International, Inc. 1718 W. Mishawaka Rd. Elkhart, IN
©2008 Crown Audio®, Inc.
Specifications subject to change without prior notice. Latest information available at www.crownaudio.com. Crown and Crown Audio are registered trademarks of Crown International.
4/08 |
