Dual/Mono Switch, Level Controls, Power Cord | Crown Audio CP660

CP660 Power Ampliﬁer

4 Operation

4.3Back Panel Controls and Connectors

F.Balanced Barrier Block Inputs One set of screw-terminal Barrier Block input connectors are provided for each channel.

G.Dual/Mono Switch

Two-position switch, one per channel pair, sets the channel pair for either Dual or Bridge-Mono operation.

H.Level Controls

Rotary level controls, one per channel.

I.5-Way Binding Post Output Jacks One pair per channel; accept banana plugs, spade lugs or bare wire. (European models do not accept banana plugs.

J.Power Cord

Figure 4.2 Back Panel Controls

and Connectors

Operation Manual

page 11

Image 11

Crown Audio CP660 operation manual Dual/Mono Switch, Level Controls, Rotary level controls, one per channel, Power Cord

Contents

Some models may be exported under the name Amcron CP660 Magnetic Field Important Safety Instructions Family Name CP Family Model Names CP660 EMC Standards Safety StandardCrown International, Inc European Representative’s Name and Address Table of Contents Channels into 4-ohm loads How to Use This ManualFeatures Welcome Unpack Your Ampliﬁer SetupYou may also stack amps without using a cabinet Install Your Ampliﬁer Distance Bridge-Mono Mode Wire Your System 3.6.1 Stereo Mode Connect to AC Mains Setup OperationStartup Procedure Turn up the level of your audio source to an optimum level Power Indicator Temp IndicatorClip Indicators Power Switch Rotary level controls, one per channel Dual/Mono SwitchPower Cord Level Controls This is normal operation for your amp Troubleshooting Speciﬁcations Ventilation Dimensions WidthGeneral Turn On Service Year Warranty Worldwide Except USA & Canada This page intentionally left blank Model Crown Factory Service Information