17

3 .

I N S TA L L AT I O N

The VT-15 is carefully packed for shipment and it should survive all but the most brutal han- dling. If there is any damage, keep the shipping material for use during any possible claim for damage with the shipper.

Included in the box:

1)The VT-15 Recording Channel

2)Line cord

3)This instruction manual

Mounting

The VT-15 is designed for installation in a standard 19 inch rack. It requires 5.25 inches of vertical space, but additional spacing between it and adjacent equipment is recommended for adequate cooling. Ideally, a ventilated panel at least 1 rack unit high (1.75 inches) should be installed above and below the VT-15 (and around any other heat producing equipment for that matter). Be sure the bottom vent slots are not blocked. It is essential that air can flow into the bottom and out of the top of the VT-15. Equipment that runs cool can last for a very long time.

In tight equipment enclosures, be sure there is adequate air flow. Forced air cooling will ben- efit all your equipment.

The VT-15 can also be used without a rack, placed on a table, counter, or even on the floor. Optional rubber feet are available, when requested at the time of the order.

Moderate electrical and magnetic fields in the vicinity of the VT-15 should not cause any degradation in noise performance, due to the well-shielded construction, but proximity to devices with motors or large power transformers (i.e. tape machines or power amps) should be avoided.

Although the vacuum tubes in the VT-15 are selected for minimum microphonic response, it is a good practice to avoid mounting locations that subject the VT-15 to very high sound or vibration levels.

Power

The VT-2 is designed to operate from 100, 120, or 220-240 volt, 50/60 Hz power. The unit will be shipped set for the voltage specified in the order, but may be changed in the field if necessary. Switching between 120V and 220V operation is simple: a recessed switch on the rear panel can be set to either voltage. The fuse value should be changed as well: 2A SB for 100/120V operation, and 1A SB for 220V operation. (For 100V operation, a simple internal wiring change is required. Call the factory for detailed instructions). The ground pin of the power cord is internally connected to the chassis. This configuration is standard in profes- sional equipment and is required by most electrical codes. A grounding screw is provided on

VT-15 Recording Channel

D.W. FEARN

Page 14 Page 16
Page 15
Image 15
Crown Audio VT-15 manual S Ta L L At I O N, Power
Page 14 Page 16

VT-15 specifications

The Crown Audio VT-15 is a robust loudspeaker system that has gained recognition for its advanced technologies and impressive audio performance, making it ideal for various applications, including live events, installations, and broadcast scenarios. Built with durability and sound quality in mind, the VT-15 serves both professionals and enthusiasts in the audio industry.

One of the standout features of the VT-15 is its high-efficiency design, which is achieved through advanced driver technology. The loudspeaker is equipped with a premium 15-inch woofer that delivers powerful low-end reproduction, ensuring a solid bass presence that enhances the overall listening experience. This, combined with a high-frequency compression driver that operates at 1 inch, ensures clear and articulate treble frequencies, resulting in a balanced sound profile suitable for different musical genres.

The VT-15 incorporates Crown’s patented Waveguide technology, designed to provide consistent and controlled sound dispersion. This feature allows the loudspeaker to effectively cover large areas without experiencing significant drop-off in audio fidelity, making it a great choice for medium to large venues. The controlled directivity also means that listeners in various positions within the space can enjoy a similar audio experience, enhancing the performance of any event.

Another defining characteristic of the VT-15 is its rugged construction. Built with a reinforced enclosure, it is designed to withstand the rigors of touring and heavy use in fixed installations. The cabinet is constructed from high-quality materials that minimize vibration and resonance, further contributing to the clarity of sound. Its lightweight design allows for easier transport and setup, making it a practical choice for audio professionals on the go.

In terms of connectivity and compatibility, the VT-15 features versatile input options, allowing it to integrate seamlessly with various audio systems. Whether used in conjunction with other Crown products or compatible equipment from different brands, the VT-15 ensures flexibility in configuration.

Overall, the Crown Audio VT-15 stands out as a high-performance loudspeaker that combines advanced technologies, durability, and sound fidelity. Its powerful drivers and innovative design make it a reliable choice for any professional audio application, providing users with the quality and performance they demand. Whether for live music, presentations, or installations, the VT-15 delivers exceptional audio experiences that elevate any event or setting.
Top Page Image Contents