![](/images/new-backgrounds/1263727/26372711x1.webp)
English
INTRODUCTION
Recommended Use of the Monitor
• Power
– Use the type of power indicated on the marking label.
• Plugs
–Do not remove any of the prongs of the monitor's
–Disconnect the power plug from the AC outlet if you are not going to use it for an indefinite period of time.
• Power cords
–Use the proper power cord with correct attachment plug type. If the power source is 120 VC, use a power cord that has UL and CSA approvals. If the power source is a 240 VAC supply, use the tandem (T blade) type attachment plug with ground conductor power cord that meets the respective European country's safety regulations, such as VDE for Germany.
–We recommend using the power cord supplied with the product. However, if another type of power cord is required power cord
–Do not overload wall outlets or power cords. Ensure that the total of all units plugged into the wall outlet does not exceed 7 amperes.
–Ensure that the total ampere ratings on all units plugged into the extension cord is not above the cord's rating.
–If the power supply cord which came with your monitor is to be connected to the PC instead of the wall outlet, this equipment should be used with UL/TUV approved computers with receptacle rated 100~240V AC, 50/60Hz, 1.1A (minimum).
–Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.
• Environment
–Place the monitor on a flat level surface.
–Place the monitor in a
–Keep the monitor away from: rain or water
overly hot, cold or humid places sunlight
dusty surroundings
equipment that generates strong magnetic fields
4
♦♦♦