SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol—heed its warning.

WARNING: The Battery and Engine Exhaust contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. The battery and posts contain lead; wash hands after handling.

WARNING: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

General Operation

1.Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.Be familiar with all controls and their proper operation. Know how to stop tractor and disengage controls quickly.

3.Never allow children under 14 years old to operate this machine. Children 14 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent.

4.Never allow adults to operate this machine without proper instruction.

5.To help avoid blade contact or a thrown object injury, keep bystanders, helpers, children and pets at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

6.Thoroughly inspect the area where the equipment is to be used. Remove all stones, sticks, wire, bones, toys, and other foreign objects which could be picked up and thrown by the blade(s). Thrown objects can cause serious personal injury.

7.Plan your mowing pattern to avoid discharge of material toward roads, sidewalks, bystanders and the like. Also, avoid discharging material against a wall or obstruction which may cause discharged material to ricochet back toward the operator.

8.Always wear safety glasses or safety goggles during operation and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes.

9.Wear sturdy, rough-soled work shoes and close-fitting slacks and shirts. Loose fitting clothes and jewelry can be caught in movable parts. Never operate this machine in bare feet or sandals.

10.Be aware of the mower and attachment discharge direction and do not point it at anyone. Do not operate the mower without the discharge cover or entire grass catcher in its proper place.

11.Do not put hands or feet near rotating parts or under the cutting deck. Contact with the blade(s) can amputate hands and feet.

12.A missing or damaged discharge cover can cause blade contact or thrown object injuries.

13.Stop the blade(s) when crossing gravel drives, walks, or roads and while not cutting grass.

14.Watch for traffic when operating near or crossing roadways. This machine is not intended for use on any public roadway.

15.Do not operate the machine while under the influence of alcohol or drugs.

16.Mow only in daylight or good artificial light.

17.Never carry passengers.

18.Disengage blade(s) before shifting into reverse. Back up slowly. Always look down and behind before and while backing to avoid a back-over accident.

19.Slow down before turning. Operate the machine smoothly. Avoid erratic operation and excessive speed.

20.Disengage blade(s), set parking brake, stop engine and wait until the blade(s) come to a complete stop before removing grass catcher, emptying grass, unclogging chute, removing any grass or debris, or making any adjustments.

21.Never leave a running machine unattended. Always turn off blade(s), place transmission in neutral, set parking brake, stop engine and remove key before dismounting.

22.Use extra care when loading or unloading the machine into a trailer or truck. This unit should not be driven up or down ramp(s), because the unit could tip over, causing serious personal injury. The unit must be pushed manually on ramp(s) to load or unload properly.

23.Muffler and engine become hot and can cause a burn. Do not touch.

24.Check overhead clearances carefully before driving under low tree branches, wires, door openings etc., where the operator may be struck or pulled from the unit, which could result in serious injury.

25.Disengage all attachment clutches, depress the brake pedal completely and shift into neutral before attempting to start engine.

26.Your machine is designed to cut normal residential grass of a height no more than 10”. Do not attempt to mow through unusually tall, dry grass (e.g., pasture) or piles of dry leaves. Dry grass or leaves may contact the engine exhaust and/or build up on the mower deck presenting a potential fire hazard.

3

Page 3
Image 3
Cub Cadet 190-670-100, 190- 670-100, 190-678-100 manual Important Safe Operation Practices, General Operation

190- 670-100, 190-678-100, 190-678-100, 190-670-100 specifications

Cub Cadet is renowned for its dedication to quality and innovation in lawn equipment. The models 190-678-100 and 190-670-100 represent a perfect combination of performance and reliability, catering to both residential and professional users who demand excellence in their outdoor maintenance tools.

Starting with the Cub Cadet 190-678-100, this model is equipped with a powerful engine designed for optimal performance. The mower features a robust build that can handle a variety of terrains, making it an excellent choice for tackling tough grass and uneven yards. One of its standout features is the adjustable cutting height, which allows users to customize the grass length according to their preferences, offering maximum versatility.

The Cub Cadet 190-670-100 shares many characteristics with its counterpart but is distinguished by its user-friendly design. It includes an intuitive control panel, making it easy for operators to adjust settings on the go. The larger cutting deck is another highlight, enabling users to cover more ground in a shorter amount of time, which is essential for those with expansive lawns or commercial properties.

Both models incorporate advanced technology designed to enhance user experience and efficiency. They feature durability enhancements such as corrosion-resistant materials and reinforced frames. The cutting systems are engineered for clean cuts, promoting healthier grass growth and providing a well-manicured appearance for lawns.

In addition to their impressive cutting capabilities, the 190-678-100 and 190-670-100 boast fuel-efficient engines, which minimize operational costs. The easy-start systems enable users to get to work quickly, while ergonomic handle designs ensure comfort during prolonged use.

Furthermore, these models are equipped with safety features that meet industry standards, ensuring that users can operate them without the worry of accidents. The models also include maintenance reminders, helping users keep track of necessary upkeep to extend the life of the equipment.

In summary, the Cub Cadet 190-678-100 and 190-670-100 are excellent choices for anyone seeking powerful, efficient, and reliable mowers. Their innovative features, robust build quality, and user-friendly designs make them standout options in the competitive landscaping equipment market. Whether for a modest yard or extensive property, these models deliver exceptional performance and dependability.