•Attach the grass bags using the slots shown in Figure 5. Close the grasscatcher cover.

Attaching the Discharge Chute

•Raise the deck to its highest position.

•On older models: Remove the clip, if already installed on the deck next to the discharge chute opening, by removing the lock nut, spring washer and hex bolt that secure it. See Figure 6A.

Chute Deflector

A

C

Cutting Deck

A

Hex Lock

Nut

Spring

Washer

Clip

Hex Bolt

Grasscatcher Pin

A

B

B

C

Retainer Strap

Pin

Figure 7

•Place the deck at its lowest position.

•Lock the discharge chute in position by hooking the retainer strap over the grasscatcher pin on the deck. See Figure 7 for the pin position.

•Raise the deck back to its highest position.

•Insert the curved end of chute tube into the hole in the grass bag cover. See Figure 8.

Insert chute tube here

Chute

B

Deck

 

 

 

Nut

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 6

•On older models: A grasscatcher pin (G in Figure 1) and nut (H in Figure 1) have been supplied in the hardware pack. Attach these to the deck in place of the clip just removed. Follow Figure 6B for order of assembly. Make sure to secure the pin tightly.

•Raise the chute deflector on the deck and hold it while you position the discharge chute over the chute opening.

•Place the top rear edge of the discharge chute over the top rear edge of the chute opening.

•Push down on the discharge chute so that its front bottom edge rolls over the bottom of the deck; then slide the chute forward to the stop on the deck. See Figure 7.

NOTE: The retainer strap is fitted at position B on the discharge chute. However, on older models of tractors, you may have to change the position of the strap depending on the location of the grasscatcher pin on the deck. Remove the retainer strap from position B on the discharge chute to position A or C corresponding to the position of the grasscatcher pin at A, B or C on the deck. See Figure 7.

Tube

Figure 8

•Place the lower end of the chute tube over the discharge chute so that the two notches on the chute tube fit into the two corresponding notches on the discharge chute. See Figure 9.

Notch Retainer

Strap

Chute

Tube

Figure 9

•Secure by clipping the two retainer straps of the discharge chute to the pins on the chute tube. See Figure 9.

8

Page 7 Page 9
Page 8
Image 8
Cub Cadet 190- 670-100, 190-678-100, 190-670-100 manual Attaching the Discharge Chute
Page 7 Page 9

190- 670-100, 190-678-100, 190-678-100, 190-670-100 specifications

Cub Cadet is renowned for its dedication to quality and innovation in lawn equipment. The models 190-678-100 and 190-670-100 represent a perfect combination of performance and reliability, catering to both residential and professional users who demand excellence in their outdoor maintenance tools.

Starting with the Cub Cadet 190-678-100, this model is equipped with a powerful engine designed for optimal performance. The mower features a robust build that can handle a variety of terrains, making it an excellent choice for tackling tough grass and uneven yards. One of its standout features is the adjustable cutting height, which allows users to customize the grass length according to their preferences, offering maximum versatility.

The Cub Cadet 190-670-100 shares many characteristics with its counterpart but is distinguished by its user-friendly design. It includes an intuitive control panel, making it easy for operators to adjust settings on the go. The larger cutting deck is another highlight, enabling users to cover more ground in a shorter amount of time, which is essential for those with expansive lawns or commercial properties.

Both models incorporate advanced technology designed to enhance user experience and efficiency. They feature durability enhancements such as corrosion-resistant materials and reinforced frames. The cutting systems are engineered for clean cuts, promoting healthier grass growth and providing a well-manicured appearance for lawns.

In addition to their impressive cutting capabilities, the 190-678-100 and 190-670-100 boast fuel-efficient engines, which minimize operational costs. The easy-start systems enable users to get to work quickly, while ergonomic handle designs ensure comfort during prolonged use.

Furthermore, these models are equipped with safety features that meet industry standards, ensuring that users can operate them without the worry of accidents. The models also include maintenance reminders, helping users keep track of necessary upkeep to extend the life of the equipment.

In summary, the Cub Cadet 190-678-100 and 190-670-100 are excellent choices for anyone seeking powerful, efficient, and reliable mowers. Their innovative features, robust build quality, and user-friendly designs make them standout options in the competitive landscaping equipment market. Whether for a modest yard or extensive property, these models deliver exceptional performance and dependability.
Top Page Image Contents