Setting Warmer Drawer Control
Warmer drawer | indicator | light | WARMER DRAWER |
|
|
| |
The indicator light | is located above the | Warmer Drawer | |
thermostat control | knob. It turns | on when | the control is set, |
and stays on until the control is turned OFF.
Setting warmer drawer
The thermostat control knob is used to select the temperature for the warmer drawer. It is located on the
control panel. The temperatures are approximate_ and are marked LO, MED and HI (See Fig. 1).
FOOD POiSONiNG HAZARD. Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness.
I_T:_J_lrj_ll Always use pothoiders or oven mitts when removing food from the warmer drawer as cookware and plates wiii be hot and you can be burned.
To set warmer drawer:
1.Open warmer drawer when cool and arrange warmer drawer rack as needed.
. For best resuits_ close the warmer drawer and preheat the drawer before adding food or plates. An empty
warmer drawer wiii fully preheat in approximately 15 minutes.
3. Place food in warmer drawer that is already at serving temperature on warmer drawer rack. Dinner plates may be warmed also.
4. Push in and turn the warmer drawer control knob in either direction to the desired temperature setting (See Fig. 1).
5.Always turn warmer drawer control knob to OFF position after use.
.... .
Fig. 1
Important notes:
•Always start with hot food when using the warmer drawer. DO NOT heat cold food in the warmer drawer.
°Flex Clean can not be set when the warmer drawer is
active.
°The warmer drawer is equipped with a catch that may require extra force to open and close the drawer.
29
