Operation

5

 

 

 

Bagger Usage

NOTE: When all of the grass bags are full, place the tractor on a firm, level surface, disengage the PTO, turn the tractor engine off and set the parking brake.

1.Flip Seat up.

2.Lift up grass bag cover by pushing in on the rear, right-side tab with your right hand, as seen in 1 of Fig. 5-1, and lifting the cover with your left hand in the center rear of the bagger cover, 2. Do not remove the chute tube assembly from the tractor.

2

1

Figure 5-1

3.Remove the grass bags, as shown in Fig. 5-2, by lifting each bag up (1) and moving the bags away from the bag support assembly (2).

2

1

Figure 5-2

4.Empty the grass clippings at a proper disposal sight, use the handle at the bottom of each grass bag. Holding the bag firmly, empty the contents

5.Replace the grass bags in the reverse order and in the same orientation in which they were removed, close lid, flip down seat, restart your tractor and resume cutting your grass.

15