Cub Cadet 3165 manual Service

•Remove key when machine is unattended to prevent unauthorized operation.

4. SERVICE

•Use extreme care in handling gasoline and other fuels. They are extremely flammable and the vapors are explosive.

•Use only an approved container.

•Never remove fuel cap or add fuel with the engine running. Allow engine to cool at least two minutes before refueling.

•Replace fuel cap securely and wipe off any spilled fuel before starting the engine as it may cause a fire or explosion.

•Extinguish all cigarettes, cigars, pipes and other sources of ignition.

•Never refuel the machine indoors because fuel vapors will accumulate in the area.

•Never store the fuel container or machine inside where there is an open flame or spark, such as a gas hot water heater, space heater or furnace.

•Never run a machine inside a closed area.

•To reduce fire hazard, keep the machine free of grass, leaves or other debris build-up. Clean up oil or fuel spillage. Allow machine to cool at least 5 minutes before storing.

•Before cleaning, repairing or inspecting, make certain the blade and all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the spark plug to prevent accidental starting.

•Check the blade and engine mounting bolts at frequent intervals for proper tightness. Also, visually inspect blade for damage (e.g., excessive wear, bent, cracked). Replace with blade which meets original equipment specifications.

•Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.

•Never tamper with safety devices. Check their proper operation regularly. Use all guards as instructed in this manual.

•After striking a foreign object, stop the engine, remove the wire from the spark plug and thoroughly inspect the mower for any damage. Repair the damage before restarting and operating the mower.

•Grass catcher components are subject to wear, damage and deterioration, which could expose moving parts or allow objects to be thrown. For your safety protection, frequently check components and

replace with manufacturer’s

recommended parts when necessary.

•Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves and use extra caution when servicing blade(s).

•Check brake operation frequently. Adjust and service as required.

•Muffler, engine and belt guards become hot during operation and can cause a burn. Allow to cool down before touching.

•Do not change the engine governor settings or overspeed the engine. Excessive engine speeds are dangerous.

•Observe proper disposal laws and regulations. Improper disposal offluids and materials can harm the environment and the ecology.

•Prior to disposal, determine the proper method to dispose of waste from your local Environmental Protection Agency. Recycling centers are established to properly dispose of materials in an environmentally safe fashion.

5