BATTERY REMOVAL

WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. Wash hands after handling.

The battery is located at the front of the tractor beneath the hood.

To remove the battery:

•Open the tractor hood as described in the previous sub-section.

•Remove the two wing nuts and the battery holddown strap from the battery holddown rods. See Figure 33.

•Spread the locking clips on the sides of the terminal covers and lift the tops of the covers to expose the battery connections. See Figure 33.

•Loosen the cable clamp of the black negative battery lead, then lift the negative cable and its terminal cover off the negative battery post (marked NEG). Move the cable away from the negative battery post.

•Repeat the above procedure to remove the cable and cover from the positive battery post (marked POS).

•Carefully lift the battery out of the tractor.

Install the battery by repeating the above steps in the reverse order.

WARNING: Always connect the posi- tive lead to the battery before con- necting the negative lead. This will pre- vent sparking or possible injury from an electrical short caused by contact- ing the tractor body with tools being used to connect the cables.

HOLDDOWN STRAP

 

 

 

 

CABLE

 

 

WING NUT

 

 

 

 

 

 

CLAMP

 

 

 

 

 

 

 

 

 

BATTERY

 

TERMINAL

 

HOLDDOWN

 

 

COVER

ROD

 

 

 

 

Figure 33

CHARGING THE BATTERY

Test and, if necessary, recharge the battery after the tractor has been stored for a period of time.

•A voltmeter or load tester should read 12.6 volts (DC) or higher across the battery terminals.

•Charge the battery with a 12-volt battery charger at a MAXIMUM rate of 10 amps.

Voltmeter

State of

Charging

Reading

Charge

Time

12.7

100%

Full Charge

12.4

75%

90 Min.

12.2

50%

180 Min.

12.0

25%

280 Min.

 

 

 

BATTERY MAINTENANCE

The battery is filled with battery acid and then sealed at the factory. However, even a “maintenance free” battery requires some maintenance to ensure its proper life cycle.

•Spray the terminals and exposed wire with a battery terminal sealer, or coat the terminals with a thin coat of grease or petroleum jelly, to protect against corrosion.

•Always keep the battery cables and terminals clean and free of corrosion.

•Always keep the terminal covers in place and closed over the battery terminals.

•Avoid tipping. Even a sealed battery will leak electrolyte when tipped.

BATTERY STORAGE

•When storing the tractor for extended periods, disconnect the negative battery cable. It is not necessary to remove the battery.

•All batteries discharge during storage. Keep the exterior of the battery clean, especially the top. A dirty battery will discharge more rapidly.

•The battery must be stored with a full charge. A discharged battery can freeze sooner than a charged battery. A fully charged battery will store longer in cold temperatures than hot.

•Recharge the battery before returning to service. Although the tractor may start, the engine charg- ing system may not fully recharge the battery.

29

Page 28 Page 30
Page 29
Image 29
Cub Cadet 5234D manual Battery Removal, Charging the Battery, Battery Maintenance, Battery Storage
Page 28 Page 30

5234D specifications

The Cub Cadet 5234D is a versatile and powerful compact tractor designed for a variety of landscaping and agricultural tasks. Known for its durability and efficiency, this model is ideal for homeowners with large yards, small farm operators, or landscapers requiring reliable performance. With a robust 34 horsepower engine, the 5234D boasts the power needed to tackle tough jobs, from mowing to hauling heavy loads.

One of the standout features of the Cub Cadet 5234D is its hydrostatic transmission. This technology offers seamless speed control, allowing operators to adjust their speed without needing to shift gears. This makes it particularly user-friendly for individuals of all skill levels, fostering a smooth driving experience whether traversing flat terrain or navigating inclines.

The tractor is equipped with a 4-wheel drive system, providing enhanced traction and stability on various surfaces. This feature is essential when working on challenging landscapes, muddy fields, or hilly areas, ensuring that the machine remains stable and maintains consistent power delivery.

Another significant characteristic of the Cub Cadet 5234D is its heavy-duty build quality. The frame and body are engineered to withstand the rigors of daily use, making it a reliable choice for both homeowners and professionals. With a tight turning radius, this compact tractor excels in maneuverability, allowing users to work effortlessly in tight spaces or around obstacles.

The 5234D also includes a convenient mid-mount mower deck, which can effectively cut grass while the operator focuses on other tasks. Its adjustable cutting height allows for customized lawn maintenance, accommodating different grass types and seasonal changes.

Comfort is also a priority with this model, as it features an ergonomic seating arrangement. The operator’s station is designed to minimize fatigue during extended use, with easy-to-reach controls and adequate legroom.

Safety is paramount, with the inclusion of safety features such as roll-over protection structures and easy-to-access brakes.

In summary, the Cub Cadet 5234D combines power, maneuverability, and comfort, making it an exceptional choice for those in need of a reliable compact tractor. Its blend of advanced technology and user-friendly design ensures it can handle a range of tasks efficiently, allowing users to maximize productivity while enjoying their work.
Top Page Image Contents