COLD WEATHER STARTING (BELOW 14° F)

Move the throttle handle to approximately the "FAST" throttle position, then follow the normal engine starting instructions above.

NOTE: An optional engine coolant heater is available from your Cub Cadet dealer. This heater will aid in starting the tractor when ambient temperatures fall below 10°F (-12°C).

USING JUMPER CABLES TO START ENGINE

WARNING: Batteries contain sulfuric acid and produce explosive gasses. Make certain the area is well ventilated, wear gloves and eye protection, and avoid sparks or flames near the battery.

If the battery charge is not sufficient to crank the engine, recharge the battery. If a battery charger is unavailable and the tractor must be started, the aid of a booster battery will be necessary. Connect the booster battery as follows:

•Connect the end of one cable to the disabled tractor battery’s positive terminal; then connect the other end of that cable to the booster battery’s positive terminal.

•Connect one end of the other cable to the booster battery’s negative terminal.

•Connect the other end of that cable to the frame of the disabled tractor, as far from the battery as possible.

•Start the disabled tractor following the normal starting instructions previously provided; then disconnect the jumper cables in the exact reverse order of their connection.

•Have the tractor’s electrical system checked and repaired as soon as possible to eliminate the need for jump starting.

STOPPING THE ENGINE

•Place the PTO switch in the “OFF” position.

•Place the throttle control lever in the “SLOW” position and allow the engine to idle for about one minute.

•Turn the ignition key to the “OFF” position and remove the key from the ignition switch.

NOTE: Always remove the key from the ignition switch to prevent accidental starting or battery discharge if the equipment is left unattended.

DRIVING THE TRACTOR

WARNING: Avoid sudden starts, exces- sive speed and sudden stops.

WARNING: Do not leave the seat of the tractor without disengaging the PTO and engaging the parking brake. If leaving the tractor unattended, turn the ignition key off and remove key.

•Adjust the operator’s seat to the most comfort- able position that allows you to operate all controls and pedals. See seat adjustment in the ADJUSTMENTS section.

WARNING: DO NOT use the seat belt if the ROPS structure has been removed from the tractor.

•Adjust the seat belt to fit snugly but comfortably around your lap, then buckle the seat belt. Refer to ADJUSTMENTS section.

•Shift the transmission Hi/Lo range shift lever on the left fender to the desired speed setting. Refer to USING THE HI/LO RANGE SHIFT LEVER in paragraphs below.

•Use the tractor and/or auxiliary hydraulic lift lever(s) to raise all tractor attachments from the ground if transporting the tractor to a work site.

•Depress the brake pedal to release the parking brake, then slowly release the brake pedal.

•Move the throttle handle to the position where the engine operates best for the load to be handled (normally 3000-3500 RPM).

•Slowly depress either the forward or reverse pedal to move the tractor in the desired direction. Refer to USING THE FORWARD and REVERSE PEDALS in paragraphs below.

STOPPING THE TRACTOR

•Fully depress the brake pedal to bring the trac- tor to a complete stop. Push downward on the parking brake lever and release the pedal to engage the parking brake. Refer to Figure 14.

•Depress the rear of the PTO switch to disengage the PTO.

•Place the throttle control lever in the “SLOW” position and allow the engine to idle for about one minute.

•Turn the ignition switch to “OFF’” and remove the key from the switch before dismounting.

•Depress the button in the center of the seat belt buckle to release the seat belt.

16

Page 15 Page 17
Page 16
Image 16
Cub Cadet 5234D manual Cold Weather Starting below 14 F, Using Jumper Cables to Start Engine, Stopping the Engine
Page 15 Page 17

5234D specifications

The Cub Cadet 5234D is a versatile and powerful compact tractor designed for a variety of landscaping and agricultural tasks. Known for its durability and efficiency, this model is ideal for homeowners with large yards, small farm operators, or landscapers requiring reliable performance. With a robust 34 horsepower engine, the 5234D boasts the power needed to tackle tough jobs, from mowing to hauling heavy loads.

One of the standout features of the Cub Cadet 5234D is its hydrostatic transmission. This technology offers seamless speed control, allowing operators to adjust their speed without needing to shift gears. This makes it particularly user-friendly for individuals of all skill levels, fostering a smooth driving experience whether traversing flat terrain or navigating inclines.

The tractor is equipped with a 4-wheel drive system, providing enhanced traction and stability on various surfaces. This feature is essential when working on challenging landscapes, muddy fields, or hilly areas, ensuring that the machine remains stable and maintains consistent power delivery.

Another significant characteristic of the Cub Cadet 5234D is its heavy-duty build quality. The frame and body are engineered to withstand the rigors of daily use, making it a reliable choice for both homeowners and professionals. With a tight turning radius, this compact tractor excels in maneuverability, allowing users to work effortlessly in tight spaces or around obstacles.

The 5234D also includes a convenient mid-mount mower deck, which can effectively cut grass while the operator focuses on other tasks. Its adjustable cutting height allows for customized lawn maintenance, accommodating different grass types and seasonal changes.

Comfort is also a priority with this model, as it features an ergonomic seating arrangement. The operator’s station is designed to minimize fatigue during extended use, with easy-to-reach controls and adequate legroom.

Safety is paramount, with the inclusion of safety features such as roll-over protection structures and easy-to-access brakes.

In summary, the Cub Cadet 5234D combines power, maneuverability, and comfort, making it an exceptional choice for those in need of a reliable compact tractor. Its blend of advanced technology and user-friendly design ensures it can handle a range of tasks efficiently, allowing users to maximize productivity while enjoying their work.
Top Page Image Contents