Using Verro (cont...)
9Wait 20 minutes before removing Verro from the pool to allow the pump motor to cool. Shut off and unplug the Power Supply every time you remove the cleaner from the water. Always remember to turn the Power Supply OFF and unplug it from the power outlet before removing the cleaner from the pool.
10Unplug the Power Supply from the GFCI outlet. Never leave the Power Supply plugged in when Verro is not in use.
11Unplug the floating power cord from the Power Supply.
12Use the floating power cord to pull Verro to the edge of the pool, then use the handle to lift it out of the water. Water will drain from Verro as it is lifted. CAUTION: Removing Verro by its floating power cord may cause severe damage to the cord requiring costly repairs.
13Store Verro and its Power Supply in a dry area out of direct sunlight. The Power Supply is water resistant, but not waterproof, and may be damaged by rain.
10iRobot Verro Owner’s Manual
