Basic Recording
✤The EASY.Q mode works only in Camera mode.
✤
The EASY.Q mode allows a beginner to easily make good recordings.
1. Set the Powerswitch to CAMERA.
2. Set the Mode switch to TAPE.
(SC-D353/D354/D355 only)
3. By pressing the EASY.Q button, all functions on the
Camcorder will be set to off and the recording
settings will be set to the following basic modes:
■Battery level, recording mode, counter, date/time,
and DIS ( ) will be displayed.
■The word EASY.Qwill appear on the LCD
screen at the same time.However, the
Date/Time will only be seen if it has been
previously set.(see page 33)
4. Press the Start/Stop button to start recording.
Recording will begin using the basic automatic
settings.
5. Press the EASY.Qbutton again in the STBY mode
and then turn the EASY.Q mode off.
■The EASY.Q function will not turn off while you
are recording.
■The camcorder will return to the settings that
were set prior to activating EASY.Q mode.
[ Notes ]
■In EASY.Q mode, certain functions are not available,
such as Menu, BLC, Manual focus.
If you want to use these functions, you must first
turn the EASY.Q mode off.
■The EASY.Q mode settings are deleted when the Battery pack is
removed from the Camcorder and must be reset when the Battery
pack is replaced.
■EASY.Q mode will not turn off during a recording.
■Taking a photo image using the PHOTO button while EASY.Q is
set releases DIS function.
■Digital Zoom, COLOR NITE SHUTTER or Digital Effect is not
available in the EASY.Q mode.
Using EASY.Q Mode (for Beginners)✤Camera EASY.Q( )
✤EASY.Q( )
1. CAMERA( )
2. Mode TAPE( )
(SC-D353/D354/D355).
3. EASY.Q( ),
OFF( ),
:
■, , ,
/Date/Time,DIS( )
■"EASY.Q"
,Date/Time( / )
, / (33 )
4. Start/Stop( )
■
5. STBY( )EASY.Q( )
,
■EASY.Q
■
■EASY.Q( ) , , MENU
,BLC ,MF
,EASY.Q( )
■, EASY.Q( )
, ,
■EASY.Q
■EASY.Q PHOTO
■EASY.Q ,
EASY.Q ()( )
4040
ENGLISH
60min
0:00:10
SP
STBY
3
1
√