✤The Audio Dubbing function works only in Player Mode.
✤You can not dub sound on a pre-recorded tape in LP or 16 bit mode.
✤You can add sound to the original sound on a pre-recorded tape
recorded in SP mode with 12bit sound.
✤Use the internal or an external microphone(not supplied) or other
audio equipment.
✤The original sound will not be erased.
1. Set the Powerswitch to PLAYER.
■If you want to use an external
microphone, connect the microphone
to the external MIC input jack on the
Camcorder.
2. Set the Mode switch to TAPE.
3. Press the (PLAY/STILL) button and
find the timeframe of the scene to be
dubbed.
4. Press the (PLAY/STILL) button to
pause the scene.
5. Press the A.DUB button on the remote
control.
■Audio Dubbing icon ( ) will be
displayed on the LCD screen.
■The Camcorder is ready for dubbing.
6. Press the (PLAY/STILL) button to
start dubbing.
■Press the (STOP) button to stop the dubbing.
[ Notes ]
■You can not use the Audio Dubbing function while playing a write
protected video tape.
■To utilize an external MIC or sound source, connect a microphone
to the MIC jack or use the AV cable to connect external sound
source input.
■To dub an external sound source, set the AV In/Out function to In
(SC-D355 only).(see page 76).
ENGLISH
Playback
7777
Dubbing Sound
Audio Dubbing (SC-D354/D355 only)✤Player Audio dubbing ( )
✤LP 16
✤,12 SP
( )
✤( )
✤
1. PLAYER( )
■,
2. Mode TAPE( )
3. (PLAY/STILL( /)) ,
4. (PLAY/STILL( /))
5. A.DUB( )
■A.DUB( )
■
6. (PLAY/STILL( /))
■(STOP( )) ,
■,
■External MIC( MIC) ,
Audio/Video( / )
■,AV In/Out In( )
(SC-D355) ( 76 )
Audio dubbing () ( SC-D354/D355)
DV
USB
AV
MIC
√
1