Samsung SCD353 manual Line, Playback, To Player, Rew, Play/Still

ENGLISH

Playback

Connecting to a TV which has no Audio and Video Input Jacks

✤ You can connect your Camcorder to a TV through a VCR.

✤

A/V

1.

Connect the Camcorder to your VCR with

1.

A/V

A/V

the Audio/Video cable.

VCR

S-Video input

Video input-Yellow

Audio input

■

The yellow jack: Video

(left)-White

:Video(

)

Audio input

■

■

The white jack: Audio(L) - Mono

(right)-Red

■

:Audio(L)[

]-

■

The red jack: Audio(R)

Camcorder

2.

Connect a TV to the VCR.

■

:Audio(R)[

]

3.

Set the Power switch to PLAYER.

TV

2.

4.

Set the Mode switch to TAPE.

3.

PLAYER(

)

5.

(SC-D353/D354/D355 only)

Audio/Video

4.

Mode

TAPE(

)

Turn on both the TV and VCR.

(

SC-D353/D354/D355)

■ Set the input selector on the VCR to

Antenna

S-Video

5.

.

Line.

LINE

■

■ Select the channel reserved for your VCR on the TV set.

■

6.

Play the tape.

Playback

6.

✤ You can play the recorded tape in Player mode.

1.

Connect a power source and set the Power switch

✤

Player(

)

to PLAYER.

1.

,

PLAYER(

)

2.

Set the Mode switch to TAPE.

TAPE(

2.

Mode

)

(SC-D353/D354/D355 only)

(

SC-D353/D354/D355)

3.

Insert the tape you wish to play back.

4.

Using the

/

(REW/FF) buttons, find the first

3.

position you wish to play back.

4.

(REW(

))

(FF(

))

5.

Press the

(PLAY/STILL) button.

■ The images you recorded will appear on the TV after a few

5.

(PLAY/STILL(

/

))

seconds.

■

,

■ If a tape reaches its end while being played back, the tape will

■

,

rewind automatically.

[ Notes ]

■

The playback mode (SP/LP) is selected automatically.

■ SP

LP

■

If the VCR has an S-Video input terminal, you may use S-Video for

■

S

,

S-Video ,

better quality.

■

S-Video (

)

.

■

The S-Video terminal transmits video only. Connect audio cables

■

,

:Audio(L)[

]

for sound.

■

If only a mono audio input is available on the TV set, use the audio

72

cable with the white jack (Audio L).