Samsung SCD353 manual Setting the Zero Memory SC-D354/D355 only, 00000

ENGLISH

Basic Recording

Setting the Zero Memory (SC-D354/D355 only)

✤The ZERO MEMORY function works in both Camera and Player modes.

✤You can mark a point on a tape that you want to return to following playback.

	Zero Memory (	) (	SC-D354/D355)
✤	Camera( )	Player( )
	ZERO MEMORY(	)
✤

1. Set the Power switch to CAMERA or PLAYER.			1.	POWER(	)	CAMERA(	)
		1		PLAYER(	)
2. Set the Mode switch to TAPE.
3. Press the ZERO MEMORY button on the remote			2.	Mode	TAPE(	)
control before the recording or during playback at
the point where you wish to return.
■ The time code is changed to a tape counter that			3.		,
is set to ZERO MEMORY with the	0:00:00			ZERO MEMORY(		)
(ZERO MEMORY indicator).				■		,
■ If you want to cancel the ZERO MEMORY
						0:00:00(
function, press the ZERO MEMORY button
				)
again.
				■		,
4. Finding the zero position.
■ When you have finished playback, fast forward or				ZERO MEMORY(		)
rewind the tape in stop mode.		œ
The tape stops automatically when it reaches the			4.
zero position.				■	,
■ When you have finished recording, set the					,
Power switch to PLAYER and press the
				■	,
(REW) button. The tape stops automatically when it reaches
				PLAYER(	),	(REW)(	)
the zero position.
					,
5. The tape counter with the (ZERO MEMORY indicator)
disappears from the display and the tape counter is changed to the
time code.		5.	(	)			,

[ Notes ]

■In the following situations, ZERO MEMORY mode may be canceled automatically:

-At the end of the section marked with the ZERO MEMORY function.

-When the tape is ejected.

-When you remove the Battery pack or power supply.

■The ZERO MEMORY may not function correctly where there is a

42 break between recordings on the tape.

■ , :

-

-

-

■,