ENGLISH
IEEE 1394 Data Transfer8080
■CPU:faster Intel®Pentium III™ 450MHz compatible.
■Operating system:Windows®98SE, ME, XP, Mac OS (9.1~10.2)
■Main memory:more than 64 MB RAM
■IEEE1394 add-on card or built in IEEE1394 card
1. Set the Powerswitch to PLAYER.
2. Set the Mode switch to TAPE.
(SC-D353/D354/D355 only)
3. Connect the DV cable (not supplied)
from the DV jack of the Camcorder
to the DV jack of the other DV device.
■Make sure that is displayed on
the LCD screen.
4. Press the Start/Stop button to begin
REC PAUSEmode.
■PAUSEis displayed on the LCD screen.
5. Start playback on the other DV device while you monitor the
picture.
6. Press the Start/Stop button to start recording.
■If you want to pause recording momentarily, press the
Start/Stop button again.
7. To stop recording, press the (STOP) button.
[ Notes ]
■When using this Camcorder as a recorder, the pictures that appear
on a monitor may seem uneven, however recorded pictures will not
be affected.
■Operation is not guaranteed for all the recommended computer
environments mentioned above.
■While transmitting data from the Camcorder to PC at strong
electric field and strong magnetic field, VIDEO signal or AUDIO
signal may transmit with noise.
Recording with a DV Connection Cable
System Requirements
IEEE 1394■CPU:Intel®Pentium IIITM450Mhz .
■:Windows®98SE, ME, XP, Mac OS(9.1~10.2)
■:64MB RAM
■IEEE 1394
1. PLAYER
( )
2. Mode TAPE( )
(SC-D353/D354/D355)
3. DV ( ) DV /
DV DV
/
■
4. Start/Stop( / ) REC PAUSE( )
■PAUSE( )
5. ,DV
6. Start/Stop(/)
■,Start/Stop(/ )
7. ,(STOP( ))
■,,
■
■(PC),
video audio
DV
DV
USB
AV
MIC
DV
USB
AV
MIC