Section 2: labels found on loader

(QTY 2) 777D11290

On Both Sides

777D11356

(QTY 2) 777I22850 On Both Sides

BUCKET LEVEL

REFERENCE POINT

Model Plate

777D11357

777I22804

 

FLOAT

 

DOWN &

3

DOWN &

CURL

 

DUMP

 

DOWN

 

1 CURL

N

DUMP 2

 

UP

 

UP &

4

UP &

CURL

DUMP

READ OPERATORS MANUAL BEFORE OPERATING

777S32188

WARNING

1. read and undersTand operaTor's Manual before operaTing.

2.keep oTHers aWaY WHen operaTing loader.

3.do noT alloW CHildren or unTrained persons To operaTe eQuipMenT.

4. loWer loader To ground, sTop engine, seT park brake and reMove keY before leaving TraCTor seaT.

5. failure To folloW safeTY rules Can resulT in

serious inJurY or deaTH.

INSTRUCTIONS

ASSEMBLY FOR FRONT END LOADER

1.park loader on firM level ground.

2.sloWlY drive THe TraCTor Close To THe loader. sTop and seT THe parking brake.

3.ConneCT Color Coded HYdrauliC QuiCk disConneCT To loader Hoses.

4.use THe loWer booM ConTrol To loWer MasTs onTo reCeivers.

5.ConTinue To loWer booM unTil all WeigHT is off THe fronT Tires.

6.loCk loader MounTing Tube inTo reCeiver WiTH lYnCH pins.

7.add Hair-pins To lYnCH pins (iMporTanT To prevenT lYnCH pin loss).

DISASSEMBLY FOR FRONT END LOADER

1.park TraCTor on firM level ground.

2.use THe loWer booM ConTrol To Take all WeigHT off of fronT Tires.

3.reMove lYnCH pins froM fronT MounT asseMblY.

4.use THe raise booM ConTrol unTil MasTs eXiT THeir reCeivers.

5.disConneCT THe Color Coded HYdrauliC QuiCk disConneCTs.

6.sloWlY drive aWaY froM loader.

IMPORTANT

To prevenT possible TransMission daMage, engage THe 4Wd onlY WHen addiTional TraCTion is needed WHile operaTing in loose soil or on slipperY surfaCes (e.g. Mud, snoW), or WHen desCending a slope. disengage THe 4Wd WHen operaTing on firM, flaT surfaCes or WHen operaTing aT HigH speeds.

6