Cub Cadet 60 warranty To Empty Bag, Using The Nozzle Vacuum, Wire

Models: 60

1 40
Download 40 pages 2.98 Kb
Page 10
Image 10

4

Operating

Your

Chipper

Shredder

Vacuum

To Empty Bag

1. a. Unhook bag straps from the lower handle.

B

b. Unsnap bag clip from the top of lower handle. See

Figure 4-3.

 

 

c. Grasp bag handle with one hand and pull lock rod

 

on mounting bracket with other hand toward engine

 

to release.

 

d. Lift bag off back of unit.

D

2. Twist the two buttons on the back of the bag to unlock

and empty contents. See Figure 4-4. Hold bag handle

 

and bag clip while emptying the contents.

 

3. Compress bag opening and fold inner flap over

 

opening.

 

4. Fold outer flap over inner flap and insert buttons on

 

the bag through metal outlets. See Figure 4-4.

C

5. Twist the buttons to lock bag. Place bag back onto unit

as instructed SETTING UP YOUR CHIPPER SHRED-

A

DER VACUUM.

 

Figure 4-3

 

 

WARNING: Do not at any time make

 

any adjustments without first stopping

 

engine and disconnecting spark plug

 

wire.

Buttons

Inner

Flap

Outer Flap

Using The Nozzle Vacuum

Yard waste such as leaves and pine needles can be vacuumed up through the nozzle for shredding. After material has been shredded by the flail blades on the impeller assembly, it will be discharged into catcher bag. Do not attempt to shred or chip any material other than vegetation found in a normal yard (i.e. branches, leaves, twigs, etc.) Avoid fibrous plants such as tomato vines until they are thoroughly dried out. Materials such as stalks or heavy branches up to 1 1/2” in diameter may be fed into the chipper chute.

Figure 4-4

1.

Place nozzle/hose vac lever in the top position on the

 

 

nozzle to vacuum through nozzle. See Figure 4-5.

 

2.

The spring loaded pin must be in the first hole (closest

 

 

to the end of the tube) of the hose adapter to operate

 

 

the nozzle vac. See Figure 4-5.

 

3.

Place both hands on top of upper handle to push unit

 

 

over yard waste.

WARNING: Do not attempt to shred, chip, or vacuum any material larger than specified on the machine or in this

manual. Personal injury or damage to the machine could result.

Figure 4-5

10

Page 10
Image 10
Cub Cadet 60 warranty To Empty Bag, Using The Nozzle Vacuum, Wire