Cub Cadet 7264 manual Using the Hydraulic Lift Lever, Using the PTO Selection Lever

•Fully depress and hold the differential lock pedal to engage the transmission differential lock. Release the pedal to disengage the differential lock. See Figure 17.

DIFFERENTIAL LOCK PEDAL (Depress and Hold to Engage)

Figure 17

NOTE: Because of the drive load on the internal engagement mechanism, releasing the differential lock pedal may not always disengage the differential lock. It may be necessary to slow the tractor, or reverse the direction of travel, to disengage the differential lock.

USING THE HYDRAULIC LIFT LEVER

The hydraulic lift system provides power for raising and positioning three point hitch and belly mounted equipment. The system’s position control feature maintains the selected height or depth of the equipment. When the hydraulic lift lever is moved to a higher or lower setting, the system repositions the equipment and maintains that selected position.

•To raise an attachment using the hydraulic lift system, the engine must be running.

•Generally, an attachment can be lowered with the engine running or off.

•There is a direct relationship between the height of the equipment and the position of the lever in its slot. Operate the equipment to determine your preferred height setting and, consequently, the position of the lift lever in its slot.

•Move the lift lever forward in the slot to the position that lowers the equipment to the desired height setting. See Figure 18.

HYDRAULIC

LIFT LEVER

	Highest
	Height
Lowest	Position
Height
Position

Figure 18

•Move the lift lever rearward in the slot to raise the equipment to a higher height setting, or all the way rearward to raise the equipment to the transport position. See Figure 18.

USING THE PTO SELECTION LEVER

The position of the PTO selection lever will deter- mine whether the rear PTO, mid PTO, or both PTO’s will be engaged when the PTO switch is activated.

WARNING: NEVER shift the PTO selec- tion lever while the PTO is engaged. Damage to internal components will occur.

•Shift the PTO selection lever rearward to select the rear PTO. The rear PTO is used to drive equipment designed to operate at an input speed of 540 RPM. See Figure 19.

PTO	PTO REVERSE
SELECTION	OVERRIDE
LEVER	SWITCH

Rear	Mid &
PTO		Mid
	Rear
	PTO	PTO

Figure 19

20